Page 1 of 2
Black gloss finish
Posted: Wed Apr 02, 2014 7:39 am
by pcdee
Hello all
Please see attached picture....whats best to get rid of these marks
Sent from my GT-I9100P using Tapatalk
Re: Black gloss finish
Posted: Wed Apr 02, 2014 7:46 am
by Raj
I use autoglym glass polish on them.
Re: Black gloss finish
Posted: Wed Apr 02, 2014 7:56 am
by pcdee
Thanks. ...will purchase that today and give it a bash!
Sent from my GT-I9100P using Tapatalk
Re: Black gloss finish
Posted: Wed Apr 02, 2014 8:06 am
by Raj
[quote="pcdee"]
Thanks. ...will purchase that today and give it a bash!
Sent from my GT-I9100P using Tapatalk
[/quote]
Just need to use a touch of elbow grease.
Re: Black gloss finish
Posted: Wed Apr 02, 2014 11:43 pm
by redz
i was about to post and ask the same question!
will buy some and try at work tomorrow lunch time!
Re: Black gloss finish
Posted: Thu Apr 03, 2014 4:35 pm
by nlr74
i asked the other day
So - I used meguiars glass polish - not a bad result , only did one side and have ordered Meguiars Plast RX Plastx Plastic cleaner and restorer polish to compare (as this was recommended on some other forums).
I'll upload some pictures afterwards.
Re: Black gloss finish
Posted: Thu Apr 03, 2014 7:18 pm
by redz
i had some Farecla G4 so used that first as it look like it need something to 'cut through' the grime the used the autoglym window polish and it hasn't come out to bad for just 30 mins work!
Re: Black gloss finish
Posted: Fri Apr 04, 2014 2:38 pm
by nlr74
Here's a before and after ...
[/URL]
and ... 5 mins work (needs more obviously)
Re: Black gloss finish
Posted: Sat Apr 05, 2014 9:08 am
by pcdee
Wow....good results.
Is Meguiars Plast available in Halfords?
Sent from my GT-I9100P using Tapatalk
Re: Black gloss finish
Posted: Mon Apr 07, 2014 1:52 pm
by nlr74
I got mine from ebay... never seen it before at Halfords
Re: Black gloss finish
Posted: Mon Apr 07, 2014 5:31 pm
by pcdee
Cool.....just bought off Amazon
Re: Black gloss finish
Posted: Tue Apr 29, 2014 3:54 pm
by martin11
Hi sorry to ask the obvious do you just apply this by hand and work it in and buff off ?? Would you recommend masking tape all the surrounding areas or not necessary ?? Cheers
Re: Black gloss finish
Posted: Tue Apr 29, 2014 9:22 pm
by pcdee
No need to mask off, just use like a wax.
Wax on wax off
Sent from my GT-I9100P using Tapatalk
Re: Black gloss finish
Posted: Tue Apr 29, 2014 11:21 pm
by martin11
Ok with a sponge pad type thing or a micro fibre cloth ? Have ordered some
Re: Black gloss finish
Posted: Wed Apr 30, 2014 4:20 am
by pcdee
I ueed microfiber ...m
Sent from my GT-I9100P using Tapatalk
