Black gloss finish

[pcdee]

Hello all
Please see attached picture....whats best to get rid of these marks


Sent from my GT-I9100P using Tapatalk

[Raj]

I use autoglym glass polish on them.

[pcdee]

Thanks. ...will purchase that today and give it a bash!

Sent from my GT-I9100P using Tapatalk

[Raj]

[quote="pcdee"]
Thanks. ...will purchase that today and give it a bash!

Sent from my GT-I9100P using Tapatalk
[/quote]

Just need to use a touch of elbow grease.

[redz]

i was about to post and ask the same question!

will buy some and try at work tomorrow lunch time!

[nlr74]

i asked the other day

So - I used meguiars glass polish - not a bad result , only did one side and have ordered Meguiars Plast RX Plastx Plastic cleaner and restorer polish to compare (as this was recommended on some other forums).

I'll upload some pictures afterwards.

[redz]

i had some Farecla G4 so used that first as it look like it need something to 'cut through' the grime the used the autoglym window polish and it hasn't come out to bad for just 30 mins work!

[nlr74]

Here's a before and after ...

[/URL]

and ... 5 mins work (needs more obviously)

[pcdee]

Wow....good results.

Is Meguiars Plast available in Halfords?

Sent from my GT-I9100P using Tapatalk

[nlr74]

I got mine from ebay... never seen it before at Halfords

[pcdee]

Cool.....just bought off Amazon

[martin11]

Hi sorry to ask the obvious do you just apply this by hand and work it in and buff off ?? Would you recommend masking tape all the surrounding areas or not necessary ?? Cheers

[pcdee]

No need to mask off, just use like a wax.
Wax on wax off

Sent from my GT-I9100P using Tapatalk

[martin11]

Ok with a sponge pad type thing or a micro fibre cloth ? Have ordered some

[pcdee]

I ueed microfiber ...m

Sent from my GT-I9100P using Tapatalk