Page 1 of 1
Cylinder 6 Glow plug
Posted: Thu Mar 27, 2014 5:21 pm
by Lloydy
After doing a 1.4.0.9;4.1.1 scan this error code was evident
Now the running of the car seems OK but want sort of symptons would I have if something was wrong? is it worth changing the plug or all plugs?
Re: Cylinder 6 Glow plug
Posted: Thu Mar 27, 2014 5:48 pm
by fenj66
mine shows 3 glow plugs out, but car still starts/runs just fine. they are prone to snapping off when being changed so i wouldnt touch them unless a serious fault made it necessary.
Re: Cylinder 6 Glow plug
Posted: Thu Mar 27, 2014 6:04 pm
by Smeeagain
agreed - I've had errors before that didn't appear to amount to anything. Then I had problems starting and thats when I got a second opinion and second reading - got them changed and all was fine.
Have you considered clearing all errors then running it for a day or two then re-scanning, or getting someone with a different bit of kit to re-scan - a lot of small local garages don't charge for a quick hook up to their laptop to see whats what.