Page 1 of 1
Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 10:02 am
by Caesium
My nav allows me to change from day to night mode manually, I wondered if there was any setting to make this change automatically with the headlights?
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 10:39 am
by rj1986
I did a bit of a google (so don't shoot the messenger)but apparently the wiring loom that goes to the lights sensor doesn't extend the the E70 to the nav module, like it does on the F series cars.
What a lot of people have done is assign one of the shortcut keys to night mode (if there is no auto mode)
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 12:22 pm
by Caesium
Found the option (with some help from a friend).
Just went and changed it!
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 12:30 pm
by X5Sport
Well come on then......tell us where it is hidden....
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 3:53 pm
by Caesium
You going to have a go then?
NAVI_MAPMODE_AUTOMATIC to aktiv
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 4:43 pm
by Mpower
[quote="Caesium"]
You going to have a go then?
NAVI_MAPMODE_AUTOMATIC to aktiv
[/quote]
Nice find
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 6:12 pm
by Don Coffey
Ok, how do you get into mapmode?
Don
Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 6:14 pm
by Mpower
By coding the option in on the CIC module
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 6:27 pm
by Don Coffey
Forgive my ignorance, is this something that requires a computer to be plugged into the car?
Don
Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 6:38 pm
by Mpower
Put it simply…yes.
Re: Coding CIC for Nav Display Day/Night change
Posted: Thu Mar 20, 2014 6:57 pm
by Don Coffey
Ok, cheers.
Don
Re: Coding CIC for Nav Display Day/Night change
Posted: Fri Mar 21, 2014 1:51 pm
by krx927
[quote="Caesium"]
Found the option (with some help from a friend).
Just went and changed it!
[/quote]
How does this work, what's the trigger? Is it like in other GPS devices (like Garmin and TomTom) the actual time when sun goes down, or is it linked to lights switched on?
Re: Coding CIC for Nav Display Day/Night change
Posted: Tue Mar 25, 2014 11:26 pm
by Mavster
It is linked to the lights coming on
Re: Coding CIC for Nav Display Day/Night change
Posted: Wed Mar 26, 2014 8:23 am
by paulrog
I assume your using NCS Expert, if so what module did you code??
Do you know if the code is the same for CCC units??