Page 1 of 1

DSc 4x4 inactive

Posted: Sat Mar 01, 2014 12:31 pm
by C11 mbu
Hello guys.. Help needed again lol.
Had an error come up dsc and 4x4 inactive, along with the abs light.. This happened last week too after having it cleaned, noticed a slight engine judder at low speed after .. The lights went off after I restarted but came back on today.. Any help or ideas much appreciated

Wayne

Re: DSc 4x4 inactive

Posted: Sat Mar 01, 2014 3:12 pm
by C11 mbu
Just had a look on google .. Could possibly be an ABS sensor.. Thoughts anyone??

Re: DSc 4x4 inactive

Posted: Sat Mar 01, 2014 4:57 pm
by fenj66
My warning light used to come on after about 10 miles, every journey. I Replaced one of the front abs sensors and that cured it.

Re: DSc 4x4 inactive

Posted: Sat Mar 01, 2014 5:07 pm
by C11 mbu
Cheers fella, I'm hoping that's what my problem is, just need to find out how to test them now

Re: DSc 4x4 inactive

Posted: Sat Mar 01, 2014 11:50 pm
by shadrack
pull the abs lead off under the bonnet and test them with a multimeter, look up which pairs of pins are which sensors on internet and test between them, one will have a total different reading to the other 3 and that is your fault, is the speedo still working

Re: DSc 4x4 inactive

Posted: Sun Mar 02, 2014 11:28 am
by C11 mbu
Cheers shadrack .. I'll try that, the speedo is working.. Also think that now the warning lights are on the judder seems to have stopped.  Maybe wishful thinking but it didn't happen yesterday

Wayne