XSeries-forum

Hi guys

Been doing some coding with my new tool and have so far

Enabled tv in motion
Enabled audio beep for unlock/lock
Enabled aux heater

A question though!!! How do I enable the voice recognition for the phone??

Thanks for all your help

Tim

Nice one, where in the country are you ?

Hi m8

I am in glasgow but originally from bristol. Your not too far away from there. Will be driving right by over Xmas when I go back to bristol for a few days

Tim

[quote=""Timh""]Hi m8

I am in glasgow but originally from bristol. Your not too far away from there. Will be driving right by over Xmas when I go back to bristol for a few days

Tim[/quote]
I think he might want you to drop by for a mince pie accompanied by your scanner

i would be interested to know if the original question was possible too.

Hi

Can't help on that one as I'm not conversant with your scanner/tool but I did mine with a Resler and Navcoder software. It reads the module before you then select a check box to enable it. Then voilà!!! You press button on steering wheel, wait for the beep and speak. Obviously it depends on which module you have on the car TCU/SES but that's another story though so won't go there just yet.

Penny


Sent from my iPhone using Tapatalk

ive been playing with the scanner i borrowed all day today, and could not see any option to enable VR on my car at least. shame, but i prob havnt got the VR module fitted.

[quote=""fenj66""]ive been playing with the scanner i borrowed all day today, and could not see any option to enable VR on my car at least. shame, but i prob havnt got the VR module fitted.[/quote]
The VR is built into the bluetooth module and most can be activated (ones that have MIT SES stamped on the side already have it) i did loads of research on this on the old forum way back and eventually did mine with a resler and navcoder.
I remember someone saying that all BT modules could have vr activated but Jeegnesh (a member who pops up every now and then...usually when there's free food involved ) has an 05 plate (i think) with bmw assistance and iirc this means he has a 'telematics' module which is different to the bluetooth one.
Also Penny has tried different makes/years of cars with mixed results The 05 55 plate was defo suspect from what i can remember.

I just can't seem to log on to the option. I can change Bluetooth name etc but can't find the vr box to tick.

Any advise??? 05 3.0d x5

Cheers for all your help

Tim

I have had a look at my Bluetooth module and it has MIT SES written on the label. Can this device be vr enabled??

Does anyone know which menu I go into with the scanner tool BMW 1.4

Thanks for all your help btw it's an 05 3.0d sport and it's back after my bolder problem!

TIM

Hi

Yes you should be able to enable voice rec with your module. I did it on mine with a Resler and Navcoder software but not sure about your scanner functionality.


Sent from my iPhone using Tapatalk

Glad your back on the road matey
As for the bt module do you have bmw assist?
Unfortunatly all the info i posted on the old forum was lost but from what i learned when doing mine way back i'm sure that or at least i was informed that if the bt module had mit ses on the side then it had vr enabled.
Mine didn't hence me going down the resler/navcoder route due to a new module costing around the £400 -£500 mark
I ask about the bmw assist as if the car has that the modules are different and vr cannot be coded.I think that you would need a seperate vr module.

No assist m8. Think I need to borrow a resler!!

[quote=""Timh""]No assist m8. Think I need to borrow a resler!![/quote]
No probs i have just replied to your pm mate

Here's a little info re bluetooth stuff but mainly about tcu's and assist http://www.xoutpost.com/electronics/blu ... s-car.html

[quote=""Timh""]Hi m8

I am in glasgow but originally from bristol. Your not too far away from there. Will be driving right by over Xmas when I go back to bristol for a few days

Tim[/quote]


Hi Tim,
soooo sorry i didnt reply, i must have missed the email so sorry for being rude and not replying to your kind message.
Cheers
Paul