Page 1 of 1
oh we are so screwed in Australia
Posted: Thu May 16, 2013 4:04 am
by macca
i have a 2005 x5 sport 3.0d and it had a weeping joint in the water hose that runs from the motor to the heater thingo,
the hose is two pieces with some sort of fitting in the middle, so i ring up my local dealer and he informs me
he can get one overnight $148.00 wow, so after asking here i order from a UK parts shop, 22 pounds or 33AUD
plus postage , so landed its a third of the price, i dont mind a dealer having a mark up but 200% seem wrong
Re: oh we are so screwed in Australia
Posted: Thu May 16, 2013 4:32 am
by Thehinch
mate we get bent over on parts prices and service. Can you share what parts shop you used in the UK as I'd like to source my parts form the UK also.
Re: oh we are so screwed in Australia
Posted: Thu May 16, 2013 1:12 pm
by ChrisLux
Try ;
www.BMMiniparts.com they're good and post overseas .
Re: oh we are so screwed in Australia
Posted: Thu May 16, 2013 7:10 pm
by shadrack
its a joke when you can post something to the other side of the world and still be a third cheaper!
Re: oh we are so screwed in Australia
Posted: Thu May 16, 2013 10:22 pm
by Raj
That is ridiculous.
Re: oh we are so screwed in Australia
Posted: Fri May 17, 2013 10:29 am
by Bargain Bucket
You should try getting Holden parts in the UK. Ridiculously expensive. But shipping costs from Oz to UK are crazy so it's not much better to source parts in Oz and have them shipped.
Re: oh we are so screwed in Australia
Posted: Mon May 20, 2013 5:33 am
by macca
bmminiparts is who i used, just got an email letting me know they have posted the goodies
Re: oh we are so screwed in Australia
Posted: Mon Jun 03, 2013 3:13 am
by macca
got the part, and went to fit it and discovered that the hose clamp on the engine side of the pipe could have been tighter,
went ahead and changed the pipe anyway and discovered that the leak was in fact the hose clamp and there was absolutely nothing wrong with the connecting piece
this pipe running from the engine to the webasto heater ( diesel) is two pieces with a connector in the middle, on one side of the join is one of those crimped clamps and the other a hose clamp.
on mine it appeared as if the joiner was some sort of metal and was corroding, however this was far from the case, when pulled apart it is some sort of plastic and was solid, all i really needed to do was tighten the clamp.
so thanks mister expert mechanic i,ll just suck up the $51.00 you just cost me
Re: oh we are so screwed in Australia
Posted: Mon Jun 03, 2013 3:18 am
by Thehinch
Good work on sorting it yourself. I think because its your own car you take more time to diagnose the problem rather than a mechanic who's always looking for the quick fix or assuming your car has the same problem as others.
BTW if you are near the northern beaches I use a mechanic based in manly vale who is very good.
Re: oh we are so screwed in Australia
Posted: Thu Jun 13, 2013 8:59 am
by rb0135
So many people go overseas for parts when right in our backyard, we have a source, 3 times cheaper than BMW.
Talk to Cliff at Parts Agents Australia (he is in QLD). He has OEM parts 1/3 price of BMW.
Rob