Page 1 of 1
Pdc's
Posted: Sun Apr 14, 2013 4:31 pm
by C11 mbu
Hello guys.
First post so apologies if I ramble, had my 2005 x5 for a couple of weeks, very very happy with the car.. But I have a couple of niggles.. 1st, got 1 pdc not working in both front and rear, had the rear one out no problem, ordering soon, need to know if I can get to front one ( left of number plate) withou taking bumper off.. 2nd, my folding mirrors when pressed, make the noise but don't fold.. Any help would be greatly appreciated
Re: Pdc's
Posted: Sun Apr 14, 2013 5:15 pm
by Colin
check out auto folding mirrors in the how to section ..
Re: Pdc's
Posted: Sun Apr 14, 2013 5:23 pm
by Horizon
[quote="C11 mbu"]
Hello guys.
First post so apologies if I ramble, had my 2005 x5 for a couple of weeks, very very happy with the car.. But I have a couple of niggles.. 1st, got 1 pdc not working in both front and rear, had the rear one out no problem, ordering soon, need to know if I can get to front one ( left of number plate) withou taking bumper off.. 2nd, my folding mirrors when pressed, make the noise but don't fold.. Any help would be greatly appreciated
[/quote]
Yes, bumper off on facelift s to access parking sensors.
http://xdrivers.co.uk/forum/https://xdr ... ic.php?t=2
Re: Pdc's
Posted: Sun Apr 14, 2013 5:30 pm
by C11 mbu
Colin, horizon, thank u for the replies, I will take a look.. Could I also ask, if I change the rear one will it still not work with me not changing the front one.. Or will the rears work ...
Re: Pdc's
Posted: Sun Apr 14, 2013 5:39 pm
by Horizon
If one has gone, the system defaults to the continuos buzzing. How did you know which ones were duff, if you have access to a BMW scanner 1.4.0 you can disable front or rear.
All the sensors are the straight type, except for the front outers, which are the angled ones
http://www.ebay.co.uk/itm/BMW-PARKING-S ... 2a2b4d2195
Re: Pdc's
Posted: Sun Apr 14, 2013 5:45 pm
by C11 mbu
Hi horizon,
I just did the ear to each one and and listened for the clicking.. All clicked apart from the 2 I mentioned .. Where would I get a scanner from, and how do u use them.. Are they straight forward... Sorry to bombard with so many questions
Re: Pdc's
Posted: Sun Apr 14, 2013 6:24 pm
by Horizon
http://xdrivers.co.uk/forum/https://xdr ... ic.php?t=7
Where are you based ?, a lot of members have scanners, they may be able to recode your sensors to ignore the front
Re: Pdc's
Posted: Sun Apr 14, 2013 6:33 pm
by Colin
Hi , if you take a read through the posts on any of these sites youll probably find it on here and in great depth, X DRIVERS has a world of information , good luck..
Re: Pdc's
Posted: Sun Apr 14, 2013 7:04 pm
by C11 mbu
Cheers to u both.. I'm in Nottingham btw.. Thanks for ur advice.. I will take a look
Re: Pdc's
Posted: Sun Apr 14, 2013 7:07 pm
by malc1950
Hi Pete / horizon , I have a continues tone and I suspect it's a rear sensor I replaced last year but when I check it with my scanner it's showing no faults ,
Now and again it all work fine, very strange !! Will investigate more tomorrow, Pete let me know when you fancy a coffee at Mc Dees
Sent from my iPhone 5 using Tapatalk
Re: Pdc's
Posted: Fri May 10, 2013 10:16 pm
by X5 ALN
How did you get on?
Diagnosed with my ear and feeling for the clicking with my finger. Verified suspected dud with INPA,
I just changed my Front Left Corner one tonight - all done in 40 mins following this guide
http://xdrivers.co.uk/forum/https://xdr ... ic.php?t=2
Sensor only cost £19 of ebay