XSeries-forum

Thanks to the guide although was slightly different as I had the witter version. Oh and Sanj too although it was 50/50 had to buy a set of Torq heads and the dummy exhausts didn't help.



Have a query though I have put the 7 pin electrical connector in place but not wired. It comes with a relay and wires but not straight forward plug and play with existing connector in the boot. Is there anyway I can connect this up without cutting wires? Looking for a neat plug solution.

[quote="jeegnesh"]
Thanks to the guide although was slightly different as I had the witter version. Oh and Sanj too although it was 50/50 had to buy a set of Torq heads and the dummy exhausts didn't help.


[/quote]

He fell on his head when he took those - just after I told him to get his hands dirty!

Right way round when I view them. Get up off the floor man, your still viewing everything from under the car

[quote="jeegnesh"]
Get up off the floor man, your still viewing everything from under the car
[/quote]

Where all the work was!  ::)

[quote="Sanj"]
[quote="jeegnesh"]
Get up off the floor man, your still viewing everything from under the car
[/quote]

Where all the work was!  ::)
[/quote]
Come on man that was easily a 50/50

)

It was.

[quote="Sanj"]
)

It was.
[/quote]
Compliment huh

i see what you mean, do you know which wires on the oem wiring are doing what lights, and i think i sent which colours on the relay do what.

failing that give sanj a multimeter and get operation lights, also i used there 'scotchlocks' to connect so no wires cut....

like this..

http://www.ebay.co.uk/itm/50-x-MIXED-SC ... 2c69856461

oh almost forgot, it will be far easier to wire if your not doing a headstand