Page 1 of 2

Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 8:50 pm
by storminmike
I dropped the Washer Bottle lid, or rather I dropped the wifes :-[

Can't see it as its a diesel and no room to swing a cat. Probably on the under tray :(

Part one here. Must be pants if they've changed it 3 times, any idea on price at dealer? Or if you have a spare uwanted gift to keep the household happy?


http://www.realoem.com/bmw/showparts.do ... fg=45&hl=3

Realoem shows no price and ebay are stupid prices (£8+)

Re: Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 9:09 pm
by kkodal78
Only a few quid.

Re: Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 9:17 pm
by storminmike
[quote="kkodal78"]
Only a few quid.
[/quote]

ta :)) :)) Guess its not aservice part then and I'm the only one stupid enough to drop it. Ah well, anothe receipt for the "looked after" portfolio :-[

Re: Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 9:19 pm
by kkodal78
I remember a friend of mine with a 3.0 petrol lost his and it cost him only a few quud to get a new one. Would an E39 one fit?

Re: Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 9:23 pm
by X5Sport
You can always say that the car comes with a spare one when you sell it...... :P

R

Re: Washer Bottle lid...I dropped it...need new one

Posted: Mon Feb 11, 2013 9:34 pm
by storminmike
[quote="kkodal78"]
I remember a friend of mine with a 3.0 petrol lost his and it cost him only a few quud to get a new one. Would an E39 one fit?
[/quote]

No idea :noexpression:...knowing BMW it would be a different diameter...

Now I think about it....
I need a captive nut for the pollen fillter screws
I need a captive nut for the sound deadning panel over the engine and bolt to go with it
I need a nut for the scuttle under the wipers
I haven't given blood for a while either so a trip to the dealer perhaps warranted


...but I'm not clumbsy O:-)

[quote="X5Sport"]
You can always say that the car comes with a spare one when you sell it...... :P

R
[/quote]


That's a point...nicely outside of the box thinking......"look sir, it's stored down there for safe keeping" :))

"Here's a pokey stick with chewing gum on the end, a torch, and a free spine/disc op discount to go with it"

Re: Washer Bottle lid...I dropped it...need new one

Posted: Tue Feb 12, 2013 11:06 am
by lezmtaylor
Got mine off ebay, bought 2 just in case!!
Lez

Re: Washer Bottle lid...I dropped it...need new one

Posted: Tue Feb 12, 2013 1:16 pm
by Steamyrotter
I dropped a screwdriver down there once  :blink:

Won't be doing that again in a hurry!!! :'(

Re: Washer Bottle lid...I dropped it...need new one

Posted: Sat Feb 16, 2013 12:44 pm
by marlin758
Washer bottle cap - It does say X5 and E39 - my son is at work in  his E39 or I could have compared them

http://www.ebay.co.uk/itm/bmw-x5-washer ... 4850b4d771

I need a couple of nuts for the washer bottle itself  and a spare washer bottle cap is stored on the undertray somewhere  :P

Re: Washer Bottle lid...I dropped it...need new one

Posted: Wed Feb 20, 2013 8:44 pm
by Stevejspm
I've just ordered one for mine today....£2.50+VAT from main dealer.  :)

Re: Washer Bottle lid...I dropped it...need new one

Posted: Thu Feb 21, 2013 6:55 pm
by storminmike
[quote="Stevejspm"]
I've just ordered one for mine today....£2.50+VAT from main dealer.  :)
[/quote]


ordered?  Is it a non stock item as I'd planned (if work ever permits) to drop in

Re: Washer Bottle lid...I dropped it...need new one

Posted: Thu Feb 21, 2013 7:16 pm
by X5Sport
Just as long as you don't drop 'it'..... :))

Re: Washer Bottle lid...I dropped it...need new one

Posted: Thu Feb 21, 2013 8:30 pm
by surveysteve
Funny, I did the exact same thing the other day  :-[
£3 from the BMW dealer. Will see if I can fish it out and put it up for £5 on ebay  :))

Re: Washer Bottle lid...I dropped it...need new one

Posted: Thu Feb 21, 2013 9:43 pm
by storminmike
[quote="X5Sport"]
Just as long as you don't drop 'it'..... :))
[/quote]

I might ask them to fit it for me seeing as it's a tricky operation and my "tools" weren't up to scratch

[quote="surveysteve"]
Funny, I did the exact same thing the other day  :-[
£3 from the BMW dealer. Will see if I can fish it out and put it up for £5 on ebay  :))
[/quote]

Must be the season for it. Including me, is that 2 or 3 now that's done it.

Perhaps it should be a dealer recall :)) due to contaminants getting in the bottle now and an unbalanced chassis due to the additional weight on the engine sub floor. Maybe that's why it pulls a little to the right>?

Re: Washer Bottle lid...I dropped it...need new one

Posted: Thu Feb 21, 2013 10:37 pm
by surveysteve
[quote="storminmike"]

Must be the season for it. Including me, is that 2 or 3 now that's done it.

Perhaps it should be a dealer recall :)) due to contaminants getting in the bottle now and an unbalanced chassis due to the additional weight on the engine sub floor. Maybe that's why it pulls a little to the right>?
[/quote]

You could be onto something there fella  :))

Did you bother even trying to get hold of it? I gave up after 5 mins. No chance I was getting my hand anywhere near it.