Page 1 of 1
Heavy smoke on acceleration
Posted: Thu Jan 10, 2013 11:31 pm
by X-5 3.0d
Hi all,
Noticed the past week or so that when accelerating heavily there seems to be quite an excessive amount of smoke coming out of my 3.0 diesel, hear it could be a number of things, car has been regularly serviced and only had its last one about 2000 miles back.
Any suggestions what this could be?
Cheers
Simon
Re: Heavy smoke on acceleration
Posted: Fri Jan 11, 2013 1:53 am
by Denis O
If the smoke is a grey/brown colour and the car is no later than 2004 the chances are you'll have the old type breather. Change this to the vortex type breather and your smoke should be gone.
Part is about £45 and there are instructions on this site how to change it.
Re: Heavy smoke on acceleration
Posted: Fri Jan 11, 2013 1:59 pm
by X5Sport
Defo worth doing....a lot cheaper than blown turbo seals!!
R
Re: Heavy smoke on acceleration
Posted: Fri Jan 11, 2013 8:17 pm
by Sanj
Jeegnesh has a 2005 car and that had the old style breather! Get that changed asap, will help a great deal (if the smoke is not blue - only on startup)
Oh and has the oil and oil filter been changed for sure? Is the oil looking clean?
Re: Heavy smoke on acceleration
Posted: Sat Jan 12, 2013 5:52 pm
by X5 ALN
My 55 plate had the old type fitted too - looked like it had never been changed.
Re: Heavy smoke on acceleration
Posted: Sat Jan 12, 2013 10:00 pm
by X-5 3.0d
Anybody know the part number?
Re: Heavy smoke on acceleration
Posted: Sat Jan 12, 2013 10:28 pm
by X5 ALN
Go to
www.realoem.com
Click to enter
Enter last 7 if your chassis and submit
Click browse parts
Engine
Cylinder head
Cylinder head cover
Number 11
Part number might depend on vehicle - hence I've given directions instead.
The one for my car is 11127799225