XSeries-forum

Connected one of the new Restler usb adaptors to my cd changer lead. The navcoder was reading fine, great I thought When I looked inside the car the on board computer was off, totally blank. There was no power to the nav either. Funny thing is the radio still works and is controlable via the steering wheel controls. The bluetooth also works fine.
I took the battery off for 20 mins but this made no difference.

Is there anything else I can do to revieve the car??

Check the fuses too.

Done that too Sanj. Fuse 73 and 7 are fine. Is there anymore to check?

Leave it for an hour - may need longer for a reset. If the Resler/Navcoder were just reading and no changes were made I think you will just have to wait (horrible, I know).

Stupid BMW electrics...

Any fuses in the back checked? Not that any have relevence but just in case.

double check wiring of resler interface and did u fire into any programing on the navcoder? Could u have turned the car into thinking it wasnt the nav unit it had in it? check fuses in the boot as well i am sure there is 3 of them 72 rings a bell!! keep us up to date with progress. try making sure u havent worked loose any connections at the back of the cd changer assuming thats where u wired ure resler into/

How did you get on with this Graham???? hope you sorted it.