Coding
Posted: Thu Jun 06, 2024 8:58 pm
Hello All,
firstly thank you for this invaluable information provided here.....so last night was the first time I had coded myself using Bimmercode. All is working fine and actually really pleased with how straight forward the app makes it (for the basics).
Only question, after the first 2 times of shutting down for a prolonged period, on start up I am getting right and left low beam failure errors (which are cleared by turning the light switch from auto to normal) - I did a few modules last night so I am not sure which could be the culprit but can anyone offer any advice before I search again please?
Thanks in advance Sean
firstly thank you for this invaluable information provided here.....so last night was the first time I had coded myself using Bimmercode. All is working fine and actually really pleased with how straight forward the app makes it (for the basics).
Only question, after the first 2 times of shutting down for a prolonged period, on start up I am getting right and left low beam failure errors (which are cleared by turning the light switch from auto to normal) - I did a few modules last night so I am not sure which could be the culprit but can anyone offer any advice before I search again please?
Thanks in advance Sean