Page 1 of 1
Reverse cam
Posted: Thu May 05, 2011 8:27 am
by wilkoturbo
Hi all I have seen the how to but I still don't get it sorry . I've bought a reverse cam and a aux in wiring loom but my problem is how can I get it to switch to the Camara auto on the screen ??
Many thanks Paul
Reverse cam
Posted: Thu May 05, 2011 9:51 am
by wilkoturbo
Anyone ?
Re: Reverse cam
Posted: Thu May 05, 2011 10:16 am
by fenj66
i think pin 17 on the blue tv module connector has to be grounded to auto switch the screen to the reverse cam.
this is easily done by utilizing the reverse light feed, but through a relay of course.
Re: Reverse cam
Posted: Thu May 05, 2011 10:23 am
by lezmtaylor
see Sanj,s write up all is explained.
Lez
Reverse cam
Posted: Thu May 05, 2011 10:43 am
by wilkoturbo
Hey thanks I've read Sanj's how to its just the relay bit I dont get why do I need one plus have u got a link of where to buy one
Many thanks Paul
Re: Reverse cam
Posted: Thu May 05, 2011 10:58 am
by Sanj
Try Maplins for the replay and you need it because the camera signal is heavily distorted otherwise...
Go in there with the picture of the replay and make sure it matches. Then just make sure the pin numbers are the same. Should cost you less than £5.
Alos, put 'car relay' in google and you'll get shed loads if Maplins is not an option.
Reverse cam
Posted: Thu May 05, 2011 11:09 am
by wilkoturbo
This picture ??
How you getting on with the led lighting
Re: Reverse cam
Posted: Thu May 05, 2011 11:18 am
by Sanj
That's the one!
Reverse cam
Posted: Thu May 12, 2011 4:12 pm
by wilkoturbo
Is this the right relay ?????
