Page 1 of 1
Not sure on my aftermarket wheel / tyre pressures
Posted: Sat Oct 26, 2019 1:00 pm
by MarkX50
Sorry gents, another newby question. My car is a Hartge with the 22” classic 2 wheels from new. The current tyres are :
Front - 265/30/22
Rear - 295/25/22
Hard to find what tyres pressures should be so any suggestions would be appreciated... also, I am not a fan of such large wheels and thin tyres. You think I could add larger rubber, or maybe I’d be best going back to the OEM 4.4is 5 spokes. Any suggestions welcome!
Re: Not sure on my aftermarket wheel / tyre pressures
Posted: Sat Oct 26, 2019 5:30 pm
by marti
Tyre pressures are normally stamped on the tyre wall...
Re: Not sure on my aftermarket wheel / tyre pressures
Posted: Sat Oct 26, 2019 8:54 pm
by sid10
Hi best trying local tyre centre they should have all of the specs for your car !
You can always drop down a few sizes 20" or 19" is your car an E53 ?
As the X6 alloys also fit with spigot rings on the fronts to centre the wheels . I have some for sale in the buy and sell section .
Re: Not sure on my aftermarket wheel / tyre pressures
Posted: Sat Oct 26, 2019 11:08 pm
by MarkX50
Yeah that have a max, but if rather go lower just not sure where to aim. Re: new tyres I’d like a set of 20” e53, either 5 or 7 spokes... so nice!
Re: Not sure on my aftermarket wheel / tyre pressures
Posted: Mon Oct 28, 2019 10:10 pm
by henrym3
What width are the wheels. Those are quite narrow tyres for 22"
Re: Not sure on my aftermarket wheel / tyre pressures
Posted: Tue Oct 29, 2019 9:02 am
by MarkX50
I’m not sure actually. They are the Hartge Classics which came on the car I am afraid.