X3 (E83) Heated Seat Wiring loom (Retro - Fit Kit)
Posted: Thu Nov 03, 2016 12:52 pm
Hi All
I recently took on updating the interior in my Z4 going from standard seats to heated electric M-Sport seats. To do this I used the X3 (E83) wiring loom recommended by Fishy Dave on Z4 Forum.
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=83970
And the kit itself:
https://www.ecstuning.com/Search/SiteSearch/61110307620/ES159521/
The kit is now only available in the USA & as delivery was so expensive ($80), I figured I would import 3 additional looms to potentially split the cost of this delivery 4 ways.
So, after cost, delivery, Duty and VAT (at the rather wonderful exchange rate of $1.18 to £1) these worked out at £55.87 each! This is all I'm asking for (Add £2.50 for Hermes delivery please).
It would cost you over £100 to import one of these individually (assuming you also got stung for Duty & VAT). There is zero profit in this for me. I will be putting them up on eBay too (with an additional 10% to try to make back the fees I will need to pay).
Included will be the retrofit instructions (for Z4 although the X3 would be identical).
I recently took on updating the interior in my Z4 going from standard seats to heated electric M-Sport seats. To do this I used the X3 (E83) wiring loom recommended by Fishy Dave on Z4 Forum.
http://www.z4-forum.com/forum/viewtopic.php?f=2&t=83970
And the kit itself:
https://www.ecstuning.com/Search/SiteSearch/61110307620/ES159521/
The kit is now only available in the USA & as delivery was so expensive ($80), I figured I would import 3 additional looms to potentially split the cost of this delivery 4 ways.
So, after cost, delivery, Duty and VAT (at the rather wonderful exchange rate of $1.18 to £1) these worked out at £55.87 each! This is all I'm asking for (Add £2.50 for Hermes delivery please).
It would cost you over £100 to import one of these individually (assuming you also got stung for Duty & VAT). There is zero profit in this for me. I will be putting them up on eBay too (with an additional 10% to try to make back the fees I will need to pay).
Included will be the retrofit instructions (for Z4 although the X3 would be identical).