XSeries-forum

Hello,

I'm new to the site and have a 2007 X5 SE 3.0 Diesel, single turbo.

Please could anyone help me please.

The vehicle has been fitted with a retrofit cic conversion and this was not working. I have a friend that has fitted these to lots of E90'S but never done this on the X5.

The maps were not working and this was down to the emulator not being fitted so this has been carried out and coded by him.

I have asked him to retrofit the comm box to my X5 and I would also like to install the genuine BMW Bluetooth car kit as this was not fitted.

Can anyone help me with questions on this.

1. Where can the MOST LOOP be found so that he can take a feed to supply the com box?

2. What is needed to retrofit the Bluetooth car kit to this vehicle and are there any guides or threads that show this being carried out.

I would be very greatful if anyone could help.

Thanks

Have a look at BMWcoders dot com, on line.  It will point you in the right direction.  I'm not sure anyone on here has got this technical with an X5.  That site is full of folks playing deep in systems setup. 

Many Thanks