XSeries-forum

hi just had a second hand instrument cluster coded in apart from milage correction to be done soon here is my problem after it was done went to start the car and the battery was flat got it started and the sat nav came up asking for a software cd nothing else will show on screen has anybody came across this and how to correct it every thing like phone and radio is working just no display apart from a software cd is required
thanks in advance

les

Sometimes whilst changing hardware these problems come up as software and settings are stored in more than one module. I find it in my job whilst changing PCB's you have to re flash the software after hardware changes. You probably need to get the latest firmware CD for the satnav V32 ? To re flash the car .
Only guessing really, sure someone will have the answer ( cue X5Sport

Not seen this before, but it does sound like you need to get the BMW firmware update disk, or find someone with one.  It only takes a few minutes to do - less than 10 typically.  You replace the Nav DVD with the firmware CD and let it run.

You can create your own but run the risk of 'bricking' the Nav computer.  Dealers sell them for about £15 I think.  You might even sweet talk a dealer into letting you borrow theirs in the car park. 

.......even a 'guru' makes guesses... :-[

i think i have an old copy kicking about somewhere,


Sent from my iPhone

Thanks everyone I used an old firmware disc now up and running again now just have to buy another latest version firmware update again  >:(