XSeries-forum

The old board had a good thread on connecting the Resler iBus interface up to the lead off the CD Changer. Would love to see them again if the owner is here?

Thanks

M.

Does this help:

http://www.reslers.de/IBUS/install.html

Damn you're quick Sanj, thanks

From memory the lead that comes off the CD has only 3 sockets - so I connect with the ground (brown) to the third pin up in those pics,with the top video pin having nothing connected.

M.

That's right M

You can see the arror pointing to the ground - third along I think. I've never owned one but x555, Lez and ITBaribie might want to add more as they own one. But I think you have it covered...

here you go m ....ta daa....



not the best photo's sorry but it gives you the idea make sure the brown wire goes to gnd on the resler and you'll have it around the right way

use the three pins closest to the corner....


when you connect up you should see live data from the ibus on your pc like this...

Good luck and let us know how you get on.

Perfect Many thanks guys.

M.

[quote=""Otto-Mate""]Damn you're quick Sanj, thanks
[/quote]
This is his day job.

[quote=""jeegnesh""]This is his day job.[/quote]

Really?

M.

Yes, that's the way to do it, I got a box from Maplins and fitted mine inside, keeps it clean and free from damage.
Lez

[quote=""Otto-Mate""][quote=""jeegnesh""]This is his day job.[/quote]

Really?

M.[/quote]
Never seen him do anything else.