Page 1 of 1
Helppppp
Posted: Wed Apr 08, 2015 3:19 pm
by subsea
Have bought an x5 back in december. engine was burning oil and a misfire on cylinder 1 and 2. bought and fitted a recon engine and the misfire on 1 and 2 is still there with lilt to no power at all from the engine... changed plugs and coils around and the fault is still there. change the injectors around as well just in case but the fault remains.
Any ideas guys ???
Kevin
Re: Helppppp
Posted: Wed Apr 08, 2015 7:23 pm
by Steamyrotter
I'd say check the wiring harness first.
You could use a spare injector and coil pack to test that.
Any error codes??
Re: Helppppp
Posted: Wed Apr 08, 2015 11:30 pm
by andym3
Do the coils have to be recoded if they've been changed?
If so & you haven't done this it could be your problem!
Re: Helppppp
Posted: Thu Apr 09, 2015 12:14 pm
by Smeeagain
[quote="subsea"]
Have bought an x5 back in december. engine was burning oil and a misfire on cylinder 1 and 2. bought and fitted a recon engine and the misfire on 1 and 2 is still there with lilt to no power at all from the engine... changed plugs and coils around and the fault is still there. change the injectors around as well just in case but the fault remains.
Any ideas guys ???
Kevin
[/quote]
I'm not really answering your question but why did you buy a recon engine??