Page 1 of 2
					
				X6 tailpipes - change to 50i type from round type.
				Posted: Fri Dec 31, 2010 10:59 am
				by X5Sport
				I rather like the look of the 50i tailpipes and just wondered if there's an official kit to change them?  RealOem lists a possible retrofit kit, but is it any good and how major a job is it to fit?
Are there any disadvantages in terms of engine breathing, I'm assuming not as it seems to fit after the rear silencer?
http://www.realoem.com/bmw/showparts.do ... g=18&fg=95 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Fri Dec 31, 2010 8:43 pm
				by Jalf
				I remember someone getting a 40d was told by BMW that it has a different fitting on its tail pipes so the BMW ones won't fit, I think they need to be moddified to get them on so its not a out of the box and on soloution.
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Fri Dec 31, 2010 9:11 pm
				by X5Sport
				[quote=""Jalf""]I remember someone getting a 40d was told by BMW that it has a different fitting on its tail pipes so the BMW ones won't fit, I think they need to be moddified to get them on so its not a out of the box and on soloution.[/quote]
Spheroids..... 

   Have to think of a different approach.  Interesting that a retrofit kit 'appears' to show it as being possizble.  I thought there might be a catch with the pipe diameters.  I'll have to go talk with the dealer and see what they can tell me (I think I know the answer to 
that one
 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Fri Dec 31, 2010 9:52 pm
				by 535dboy
				I've done it on my X5
Actual BMW accessory and fitted by them
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 1:41 pm
				by X5Sport
				Now I am all ears.  I notice in the US they get these tailpipes on the 35i now as an option.  I'll go talk to parts when I pick the X6 up from the Body Doctor next week..........and let people know - assuming I haven't had a heart attack from the cost.
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 2:20 pm
				by 535dboy
				[quote=""X5Sport""]Now I am all ears.  I notice in the US they get these tailpipes on the 35i now as an option.  I'll go talk to parts when I pick the X6 up from the Body Doctor next week..........and let people know - assuming I haven't had a heart attack from the cost.[/quote]
I paid about £350 fitted at BMW 
I think they make a good visual difference
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 3:56 pm
				by 535dboy
				
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:03 pm
				by pvr
				Can you post a pre-change picture as well so the difference is clear?
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:28 pm
				by 535dboy
				[quote=""pvr""]Can you post a pre-change picture as well so the difference is clear?[/quote]
No because some knob will come along soon and make sarcy comments, even if pictures are requested !
However, as it is you and I like you
 

 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:30 pm
				by pvr
				hmm, yes. The new ones are nicer.
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:35 pm
				by 535dboy
				[quote=""pvr""]hmm, yes. The new ones are nicer.[/quote]
A compliment from you!?
Sit down and rest, I don't want you over exerting yourself !
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:39 pm
				by pvr
				It is a compliment about the car, not you or your poor driving standard 

 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 4:45 pm
				by 535dboy
				[quote=""pvr""]It is a compliment about the car, not you or your poor driving standard 

[/quote]
Nice to have you back ! Happy New Year 
When is the next Z-run, I've got some 'wet' tyres now !
 
			
					
				X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 8:47 pm
				by flyfs6
				If these fit, maybe we could do a group buy if there's enough interest. Through another forum Sytner offer 15% off, and the last time I checked it covered these (might change if margins have changed).
Through a GB we could save a bit more perhaps.
			 
			
					
				Re: X6 tailpipes - change to 50i type from round type.
				Posted: Sat Jan 01, 2011 10:45 pm
				by 535dboy
				B.18.30.2.147.646 
And as above ending in 647 instead