XSeries-forum

[quote=""wilkoturbo""]Not loads getting to work 120 nipping around town 30 maybe ? Just the lights on ![/quote]

all depends on the distance u've run, not the time. only 120+30miles?? no way! if u can burn all that oil in just that bit of running ur engine wouldn't even start!

what's the total mileage from jan refill to now?

also what's the 'damp spot' is it oil? if so there's a leak as well. it maybe small but that's only the oil u see drained at home.

Sorry sorry sorry 120 a week just to work about 30 running around a week sins jan 23 rd

I'll take a photo now , I get engine oil low !??

first pic looks like a bolt sensor leakin !?

So that's approx 1,500 miles since last fill? Your last picture shows too much oil in the engine. Should be level with the top indent ring. At a guess you have about 0,5 litre too much in there. Gap between rings is approc 1 litre. If that's the true oil level as measured with a warm engine and after being allowed to settle for a few minutes, and on level ground, and you got a warning then the level sensor is faulty would be my first assessment.

Many thanks where is the sensor plus what is the sensor with oil on in the pics I've uploaded ?

just a quick high jack ive got an oem filter, and my light says i need a change so what oil is it castrol......

Edge 05W 30.

7.3 litres worth.

[quote=""Sanj""]Edge 05W 30.

7.3 litres worth.[/quote]
cheers for that

No idea what one your piccie shows, but according to the TIS for the car..

1. Oil level sensor.....on the bottom of the sump at a guess...

http://tis.spaghetticoder.org/s/view.pl?1/04/43/40
another piccie here...
http://tis.spaghetticoder.org/s/view.pl?1/06/85/32

2. Oil pressure sensor - looks to be behind the alternator.....

http://tis.spaghetticoder.org/s/view.pl?1/08/05/80