XSeries-forum

Loving the black wheels. Hoping to do something similar to my winters when the Mrs isn't looking (at our bank balance)

Do you have any links for the lights you have, they look nice & clean.

[quote="Richard137"]
Do you have any links for the lights you have, they look nice & clean.
[/quote]

Hiya Rich,

As per post 10 by Raj mate http://xdrivers.co.uk/forum/index.php/t ... 061.0.html

From HIDS Direct, you will have to drill a hole in the back of the headlight, 22 or 25mm can't remember exactly. I have found that if u need to have the engine running for a few seconds otherwise they don't fire correctly.

[quote="grumpywurzel"]
[quote="Richard137"]
Do you have any links for the lights you have, they look nice & clean.
[/quote]

Hiya Rich,

As per post 10 by Raj mate http://xdrivers.co.uk/forum/index.php/t ... 061.0.html

From HIDS Direct, you will have to drill a hole in the back of the headlight, 22 or 25mm can't remember exactly. I have found that if u need to have the engine running for a few seconds otherwise they don't fire correctly.
[/quote]

Thanks Grumpy, I read that thread this afternoon (and re-read it a further x3 times), The problem starts with the drilling malarkey, I'm stuffed when there are any type of power tool involved (Medical issues with HaVS), was hoping there was a plug n play.

[quote="Richard137"]
[quote="grumpywurzel"]
[quote="Richard137"]
Do you have any links for the lights you have, they look nice & clean.
[/quote]

Hiya Rich,

As per post 10 by Raj mate http://xdrivers.co.uk/forum/index.php/t ... 061.0.html

From HIDS Direct, you will have to drill a hole in the back of the headlight, 22 or 25mm can't remember exactly. I have found that if u need to have the engine running for a few seconds otherwise they don't fire correctly.
[/quote]

Thanks Grumpy, I read that thread this afternoon (and re-read it a further x3 times), The problem starts with the drilling malarkey, I'm stuffed when there are any type of power tool involved (Medical issues with HaVS), was hoping there was a plug n play.

[quote="grumpywurzel"]
[quote="Richard137"]
[quote="grumpywurzel"]
[quote="Richard137"]
Do you have any links for the lights you have, they look nice & clean.
[/quote]

Hiya Rich,

As per post 10 by Raj mate http://xdrivers.co.uk/forum/index.php/t ... 061.0.html

From HIDS Direct, you will have to drill a hole in the back of the headlight, 22 or 25mm can't remember exactly. I have found that if u need to have the engine running for a few seconds otherwise they don't fire correctly.
[/quote]

Thanks Grumpy, I read that thread this afternoon (and re-read it a further x3 times), The problem starts with the drilling malarkey, I'm stuffed when there are any type of power tool involved (Medical issues with HaVS), was hoping there was a plug n play.