DSc 4x4 inactive

[C11 mbu]

Hello guys.. Help needed again lol.
Had an error come up dsc and 4x4 inactive, along with the abs light.. This happened last week too after having it cleaned, noticed a slight engine judder at low speed after .. The lights went off after I restarted but came back on today.. Any help or ideas much appreciated

Wayne

[C11 mbu]

Just had a look on google .. Could possibly be an ABS sensor.. Thoughts anyone??

[fenj66]

My warning light used to come on after about 10 miles, every journey. I Replaced one of the front abs sensors and that cured it.

[C11 mbu]

Cheers fella, I'm hoping that's what my problem is, just need to find out how to test them now

[shadrack]

pull the abs lead off under the bonnet and test them with a multimeter, look up which pairs of pins are which sensors on internet and test between them, one will have a total different reading to the other 3 and that is your fault, is the speedo still working

[C11 mbu]

Cheers shadrack .. I'll try that, the speedo is working.. Also think that now the warning lights are on the judder seems to have stopped.  Maybe wishful thinking but it didn't happen yesterday

Wayne