Cool, thanks - I've literally opened the bonnet once when I checked the car over to buy it... and have not seen the car much as its been in for repairs. I'll have a nose around the webasto when I get home from work tonight.
I'll keep a log here of my chosen method to get the webasto working on remote.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Aux Heater
-
dirtymonkey29
- Snr Member
- Posts: 1301
- Joined: Sun Feb 06, 2011 7:01 pm
Aux Heater
Poke a sewing needle down the side of pin 1 and connect to that for a decent connection
-
Franknstein
- Newbie
- Posts: 43
- Joined: Fri Sep 28, 2012 9:07 am
Re: Aux Heater
Ok, got home from work and tried it.
Did not do anything.
Although, car was fully warmed up as I had just taken it for a drive from the station to home.
Do I need to wait till its cold?
What about ambient temperature?
Or should it just fire up at pin 1 regardless of ambient or engine temp?
here are some pics of my heater below. I took them as I thought i may be possible that it has the webasto receiver already installed, and perhaps I never received the remote with the car. If thats the case, how would I identify it? These are photos of all the plugs and wiring coming out from the unit that I can see:
<br>
<br>
<br>
Did not do anything.
Although, car was fully warmed up as I had just taken it for a drive from the station to home.
Do I need to wait till its cold?
What about ambient temperature?
Or should it just fire up at pin 1 regardless of ambient or engine temp?
here are some pics of my heater below. I took them as I thought i may be possible that it has the webasto receiver already installed, and perhaps I never received the remote with the car. If thats the case, how would I identify it? These are photos of all the plugs and wiring coming out from the unit that I can see:
<br>
<br>
<br>
Last edited by Franknstein on Thu Oct 04, 2012 7:04 pm, edited 1 time in total.
-
Franknstein
- Newbie
- Posts: 43
- Joined: Fri Sep 28, 2012 9:07 am
Re: Aux Heater
Right. Went outside now to test it again. It works! Used the sewing needle.... I obviously didn't make a proper connection last time. Also upon reading aanother thread on here i now see the webasto receiver gets installed in the boot... So ignore my pics.. They won't tell if i have the webasto receiver installed. I will open her up on the weekend to get a proper look.