Hi all
Could someone measure the position of the x5 badge on a facelift E53 please? I've got a new one to put on and want it in the correct place.
Thanks
Andy.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
X5 badge placement
-
storminmike
- Snr Member
- Posts: 1013
- Joined: Sat Oct 30, 2010 3:52 pm
- Location: Manchester
Re: X5 badge placement
Try this????
http://tis.spaghetticoder.org/s/view.pl?1/09/44/88
Stick on top edge of adhesive tape ① parallel to bottom edge of rear lid ② at distance "A".
Mark measurement "B" from side edge ③ measured on top edge of adhesive tape.
Dimensions:
A= 22 mm
B= 53 mm
Note:
Measurement "C" is for information purposes only, as it is determined by carrier film.
C= 8.7 mm
http://tis.spaghetticoder.org/s/view.pl?1/09/44/88
Stick on top edge of adhesive tape ① parallel to bottom edge of rear lid ② at distance "A".
Mark measurement "B" from side edge ③ measured on top edge of adhesive tape.
Dimensions:
A= 22 mm
B= 53 mm
Note:
Measurement "C" is for information purposes only, as it is determined by carrier film.
C= 8.7 mm
Last edited by storminmike on Fri Jun 08, 2012 9:42 pm, edited 1 time in total.
Re: X5 badge placement
That's great many thanks.