PDC problem

[JAMMA]

Decided to buy one of these BMW scanners and it arrived today. Brilliant bit of kit for the money. Managed to narrow down the pdc problem I have and here are the errors:

PDC -> 13/C4 - Converter, rear centre right
22/C6 - Acoustic generator, front, off

I also have this error which im not sure if it is related or not?:

IKE -> 11/C4 - Acoustic transmitter disconnected (gong tone 1/2/3)

Can anyone shed some light on these errors? I know the first error is one of the rear sensors. But the other 2 im a bit puzzled

Jamie

[g60renshaw]

Which scanner did you get?

I would suggest it means the sensor is not working on the inner right rear and also the gong has been switched off or is not working.

The IKE code means the warning gong has been disconnected in the clocks, which is a bit suspicious...

Jay

[JAMMA]

Its the bmw 1.4.0 scanner im using. 2here is the front acoustic generator located so i can check it out? And i take it i'll need to remove the speedo to try and plug the ike transmitter back in?

[dirtymonkey29]

Have a look on realoem.com

Actually just had a look on there and couldn't see anything. Maybe tis.spaghetti coder might be worth looking at.