Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

fitting my amplifier.

Discuss the problems with your X5 (E53).
Post Reply
troy.wyse
Member
Member
Posts: 61
Joined: Fri Feb 03, 2012 1:45 pm

fitting my amplifier.

Post by troy.wyse » Wed May 02, 2012 12:57 pm

i cant work out white wires i need to cut into for audio feed or remote. searched and found a link but thats for when the amp is under cd changer not in the boot under spare wheel and wires are different

User avatar
Sanj
Lifer
Lifer
Posts: 5624
Joined: Sat Jul 31, 2010 11:45 am
Location: Berkshire

Re: fitting my amplifier.

Post by Sanj » Wed May 02, 2012 2:42 pm

From your quadlock on the RCM (Radio Control Module):

Rear Left
+Yellow w/ Violet stripe
-Yellow w/ Grey stripe

Rear Right
+ Blue w/ Violet stripe
-Blue w/ Grey stripe

Remote
Violet w/ White stripe
Scn Protect,Alarm Chirp,Ashtray del,Sub install,IV2,Screens,PS2 Media,Chrome rings,Schnitzer pedals,Reverse cam,Silver Grills,F/mirrors,Comp Spkrs,Heated S/W,20"168s,Splash scn,Arches,Remap,LED Tails,ACS Spoiler,'is' Bumper Trim,Rear heated seats,Rear blinds

troy.wyse
Member
Member
Posts: 61
Joined: Fri Feb 03, 2012 1:45 pm

Re: fitting my amplifier.

Post by troy.wyse » Wed May 02, 2012 5:35 pm

Cheers sanj. Has Tom been to get the exhaust yet?

User avatar
Steamyrotter
Snr Member
Snr Member
Posts: 1304
Joined: Sat Jul 31, 2010 11:06 pm

Re: fitting my amplifier.

Post by Steamyrotter » Wed May 02, 2012 11:51 pm

Just a note...

If you have Bluetooth via ULF and want shot of the original amp arrangement then you will need to connect to the FRONT outputs.

The bluetooth / SRS goes through them.......

I found out the hard way :)
If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)

User avatar
Sanj
Lifer
Lifer
Posts: 5624
Joined: Sat Jul 31, 2010 11:45 am
Location: Berkshire

Re: fitting my amplifier.

Post by Sanj » Wed May 02, 2012 11:54 pm

[quote=""troy.wyse""]Cheers sanj. Has Tom been to get the exhaust yet?[/quote]

Afraid not. :cry:
Scn Protect,Alarm Chirp,Ashtray del,Sub install,IV2,Screens,PS2 Media,Chrome rings,Schnitzer pedals,Reverse cam,Silver Grills,F/mirrors,Comp Spkrs,Heated S/W,20"168s,Splash scn,Arches,Remap,LED Tails,ACS Spoiler,'is' Bumper Trim,Rear heated seats,Rear blinds

troy.wyse
Member
Member
Posts: 61
Joined: Fri Feb 03, 2012 1:45 pm

Re: fitting my amplifier.

Post by troy.wyse » Thu May 03, 2012 2:36 am

[quote=""Steamyrotter""]Just a note...

If you have Bluetooth via ULF and want shot of the original amp arrangement then you will need to connect to the FRONT outputs.

The bluetooth / SRS goes through them.......

I found out the hard way :)[/quote]

Cheers mate but I'm keeping original amp the is just to wire in my sub and amp.

Sanj he will be getting it this week because his parents are bringing it back down to me at and they are up there this weekend. Sorry for all the pissing about

Post Reply