Reverse cam

wilkoturbo · Post by **wilkoturbo** » Thu May 05, 2011 8:27 am

Hi all I have seen the how to but I still don't get it sorry . I've bought a reverse cam and a aux in wiring loom but my problem is how can I get it to switch to the Camara auto on the screen ??

Many thanks Paul

wilkoturbo · Post by **wilkoturbo** » Thu May 05, 2011 9:51 am

Anyone ?

fenj66 · Post by **fenj66** » Thu May 05, 2011 10:16 am

i think pin 17 on the blue tv module connector has to be grounded to auto switch the screen to the reverse cam.
this is easily done by utilizing the reverse light feed, but through a relay of course.

lezmtaylor · Post by **lezmtaylor** » Thu May 05, 2011 10:23 am

see Sanj,s write up all is explained.
Lez

wilkoturbo · Post by **wilkoturbo** » Thu May 05, 2011 10:43 am

Hey thanks I've read Sanj's how to its just the relay bit I dont get why do I need one plus have u got a link of where to buy one

Many thanks Paul

Sanj · Post by **Sanj** » Thu May 05, 2011 10:58 am

Try Maplins for the replay and you need it because the camera signal is heavily distorted otherwise...

Go in there with the picture of the replay and make sure it matches. Then just make sure the pin numbers are the same. Should cost you less than Â£5.

Alos, put 'car relay' in google and you'll get shed loads if Maplins is not an option.

wilkoturbo · Post by **wilkoturbo** » Thu May 05, 2011 11:09 am

This picture ??

How you getting on with the led lighting

Sanj · Post by **Sanj** » Thu May 05, 2011 11:18 am

That's the one!

wilkoturbo · Post by **wilkoturbo** » Thu May 12, 2011 4:12 pm

Is this the right relay ?????

XSeries-forum

XSeries-forum

Reverse cam

Reverse cam

Reverse cam

Re: Reverse cam

Re: Reverse cam

Reverse cam

Re: Reverse cam

Reverse cam

Re: Reverse cam

Reverse cam