Hi guys,
Below i have attached fault codes from the footwell control module. Just wondering if anyone has any clue as to what these are and what I would need to replace.
BMW X1 E84 20D 2011 XDrive
Thank you.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
FRM Fault Codes
-
EltonJohn101
- Newbie
- Posts: 3
- Joined: Sat Mar 23, 2024 7:26 pm
FRM Fault Codes
- Attachments
-
- IMG_5761.png (214.48 KiB) Viewed 2778 times
FRM Fault Codes
Looking the codes up on line - this one’s not bad - https://bmwfault.codes/
Code 00A8AA - low headlight beam fault. Could be an issue with adaptive headlight if fitted?
Code 009CBA - LIN Bus disturbed - possible wiring issue, usually affect door card buttons for mirrors etc.
Code 00A8AD - side marker (sidelight faulty). Linked with the 00A8AA code.
Code 009CC5 - side mirror fault. Could be wiring and is linked to the 009CBA code.
The first three codes look to be historic - as in not present now - so try clearing them and see if they return. The last code is current - as in present at the moment.
Code 00A8AA - low headlight beam fault. Could be an issue with adaptive headlight if fitted?
Code 009CBA - LIN Bus disturbed - possible wiring issue, usually affect door card buttons for mirrors etc.
Code 00A8AD - side marker (sidelight faulty). Linked with the 00A8AA code.
Code 009CC5 - side mirror fault. Could be wiring and is linked to the 009CBA code.
The first three codes look to be historic - as in not present now - so try clearing them and see if they return. The last code is current - as in present at the moment.
Never anthropomorphise computers. They hate that.-
EltonJohn101
- Newbie
- Posts: 3
- Joined: Sat Mar 23, 2024 7:26 pm
FRM Fault Codes
Oh Perfect, I will clear them and see which pops back up.
It’s a little strange as I have no problems with the side mirrors, or any of my interior electronics. The only issue im facing is, when I try to access the FRM via BimmerCode to code it, I get an error message regarding a “critical error”.
Attached an image below. I’m wondering whether it could do with removing a reprogramming/a hard reset?
It’s a little strange as I have no problems with the side mirrors, or any of my interior electronics. The only issue im facing is, when I try to access the FRM via BimmerCode to code it, I get an error message regarding a “critical error”.
Attached an image below. I’m wondering whether it could do with removing a reprogramming/a hard reset?
- Attachments
-
- IMG_5586.png (121.06 KiB) Viewed 2706 times
-
- IMG_5585.png (47.28 KiB) Viewed 2706 times