Got a number of faults during a long drive last night:
A3C7 - Air spring_FALL_NETWORKMANAGMENT
60B0 - Flat tire Indicator: RPA inactive due to excessive air spring height difference at rear axel
5FB4 - Energysaving mode active
Both rear air bags are at full expansion and the rear is riding high.
Just about to have a look underneath, guessing its a level sensor issue?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
2010 E70 X5 3.0d - High Rear Suspension
2010 E70 X5 3.0d - High Rear Suspension
Level sensor is plastic so could have broken.
Also check the contacts in the plug for dirt/corrosion.
Also check the contacts in the plug for dirt/corrosion.
2010 E70 X5 3.0d - High Rear Suspension
Fitted new level sensor today, old one when taken off didn't have smooth rotation of the actuator arm.
At full air spring pressure the ride was very bumpy, even more so when going over speed bumps!
Suprisingly taking it for drive didn't sort the levels out.
Plugged ISTA in, inputted wheel size and dimension from bottom of rim to wheel arch on both wheels. Took it for a drive and the height was corrected.
Repeated the same again and all is good!
At full air spring pressure the ride was very bumpy, even more so when going over speed bumps!
Suprisingly taking it for drive didn't sort the levels out.
Plugged ISTA in, inputted wheel size and dimension from bottom of rim to wheel arch on both wheels. Took it for a drive and the height was corrected.
Repeated the same again and all is good!
2010 E70 X5 3.0d - High Rear Suspension
Glad you got it sorted out.