Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
NO LONGER WANTED A single front type 259 wheel
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
After an enforced change of plans, I need a single wheel to complete a square set.
Any condition really, in need of a refurb but not mullered or welded.
If you have one, know of one or see one for sale, please get in touch
Any condition really, in need of a refurb but not mullered or welded.
If you have one, know of one or see one for sale, please get in touch
-
- Newbie
- Posts: 42
- Joined: Wed Jun 01, 2022 7:26 am
A single front type 259 wheel
Currently on EBay, this any good?
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
Yes I've seen that one and another on eBay, but at the asking prices plus £80 to refurb it, for a colour change, its way too expensive.
The one I have on route was £150 delivered.
The one I have on route was £150 delivered.
-
OnlineX5Sport
- Global Moderator
- Posts: 18776
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
A single front type 259 wheel
I thought there was a centre bore difference between E70 & 71?
Never anthropomorphise computers. They hate that.
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
In my experience many sellers assume X5 and X6 wheels are all fully interchangeable, whereas we know they're not.
I'll probably use off the shelf 72.6 /15mm spacers on the rear with spigot rings on the wheels. I'm also waiting on a confirmed quote to make one piece spacers with spigots to allow the 74.1 wheels to fit the 72.6 hub. Estimated cost circa £60, so not vastly more cost. I have to measure the hubs carefully when I return to the UK.
I'll probably use off the shelf 72.6 /15mm spacers on the rear with spigot rings on the wheels. I'm also waiting on a confirmed quote to make one piece spacers with spigots to allow the 74.1 wheels to fit the 72.6 hub. Estimated cost circa £60, so not vastly more cost. I have to measure the hubs carefully when I return to the UK.
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
It occurs to me it could be wasted effort and expense with milder winters for the foreseeable. But I already have the BMW approved winter tyres and 3 of 4 wheels.
I concluded the 285 tyre on the 11" rear rim though OK just doesn't look quite right. When the second set of type 300 rims are freed up I'll buy some all season rubber which in time will be all I am likely to need
I concluded the 285 tyre on the 11" rear rim though OK just doesn't look quite right. When the second set of type 300 rims are freed up I'll buy some all season rubber which in time will be all I am likely to need
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
Scrapped this idea (again), going to stick with what I have, which is too much!
-
OnlineX5Sport
- Global Moderator
- Posts: 18776
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
A single front type 259 wheel
Changed the heading for you.
Never anthropomorphise computers. They hate that.
-
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
A single front type 259 wheel
Overlooked that ☺