Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Beast 2.0 Modding
Re: Beast 2.0 Modding
Enjoy
Re: Beast 2.0 Modding
What can I say. Big day as finally collected Beast2.0 from its final time away.
Big thanks to RyanDetails for getting it looking spot on. Full correction, PPF and ceramic coat.
I think my wife is more than a little happy with the final result.
Also just fitted the new mats + door seals from the dealers and number plate back on the front.
Huge thanks to all involved in returning Beast2.0 to its former glory with a little of my own touch thrown in:
Bespoke Leathering Ltd
FullhouseCustoms
Car Care Repair Midlands Limited
Midland VW
RyanDetails
It will be going in to KYCS for one last bit.
Big thanks to RyanDetails for getting it looking spot on. Full correction, PPF and ceramic coat.
I think my wife is more than a little happy with the final result.
Also just fitted the new mats + door seals from the dealers and number plate back on the front.
Huge thanks to all involved in returning Beast2.0 to its former glory with a little of my own touch thrown in:
Bespoke Leathering Ltd
FullhouseCustoms
Car Care Repair Midlands Limited
Midland VW
RyanDetails
It will be going in to KYCS for one last bit.
-
Online
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
Re: Beast 2.0 Modding
Superb
Re: Beast 2.0 Modding
Cheers buddy. Very pleased with how it’s all turned out. However my OCD is still kicking in so might be ordering all new door seals (the ones round the actual door aperture this time) too soon and some new rear lights as although Ryan tried to machine them the best he could they aren’t quite there.
Re: Beast 2.0 Modding
Brilliant Result
The inner rear lights on my 4.6 have never cleaned up well ( 2 attempts), and seem to dull down again quickly. I brought a new set of inner's but they have dulled down as well
I thought about an early E70 inner set but have never got around to trying them
Now relax and enjoy for awhile (just don't go around the back)
The inner rear lights on my 4.6 have never cleaned up well ( 2 attempts), and seem to dull down again quickly. I brought a new set of inner's but they have dulled down as well
I thought about an early E70 inner set but have never got around to trying them
Now relax and enjoy for awhile (just don't go around the back)
Re: Beast 2.0 Modding
Superb, been following the thread, but would be interesting to see a couple of before you started photos (unless I’ve missed them) to show what a stunning job you have done.
Re: Beast 2.0 Modding
That looks amazing.
Congratulations on reaping the rewards of all that hard work
Congratulations on reaping the rewards of all that hard work
-
OnlineX5Sport
- Global Moderator
- Posts: 18777
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Beast 2.0 Modding
Looking almost new Raj. You must be well pleased with the outcome.
Never anthropomorphise computers. They hate that.
- lezmtaylor
- Member
- Posts: 986
- Joined: Sat Jul 31, 2010 11:25 pm
- Location: Gloucester
Re: Beast 2.0 Modding
It sure is a lovely job, how about an X5 meet up in 2021 ?
Lez
Lez
-
Online
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
Re: Beast 2.0 Modding
If 6 owners are invited I'll be there, depending when it was held
-
OnlineX5Sport
- Global Moderator
- Posts: 18777
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Beast 2.0 Modding
We were allowed at the last one I went to. Hard to believe it was 8 years ago already! Held near Uxbridge.
.... I wonder how many are still owners and/or members? This was at Jason’s place - BW Chiptune. His crew did a mean BBQ for all of us
.... I wonder how many are still owners and/or members? This was at Jason’s place - BW Chiptune. His crew did a mean BBQ for all of us
Never anthropomorphise computers. They hate that.
-
Online
- Snr Member
- Posts: 1757
- Joined: Mon Apr 18, 2011 8:30 am
- Location: Kent, garden of England
Re: Beast 2.0 Modding
As my summers are not generally in the UK these days, my attendance options could be limited but if its doable count me in now.
Re: Beast 2.0 Modding
Been following this thread from the beginning and have to say it’s impressive, as I need some paintwork done, not to this extent, much as I’d like but often thought about having the black plastic done but worry about how well it will take/stick, not peel off. Have you had any previous experience having this done that influenced your decision.