Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Rear washer jet?

Discuss anything to do with the (E83) BMW X3 here
(Older F25 discussion within will ideally to be moved to F25 Sub section below)
Post Reply
Rocky-S
Newbie
Newbie
Posts: 15
Joined: Mon Aug 10, 2020 2:03 pm

Rear washer jet?

Post by Rocky-S » Tue Sep 29, 2020 12:34 pm

After a lot of searching & googling without finding the answer hoping someone can help?
Rear washer jet isn’t working,now the pump is working,under the mats are dry so I can only assume the jet is blocked?
How do I remove the rear jet to attempt unblocking it ?
Attachments
35E49243-3CA8-4F5A-9875-DA3792833D4A.jpeg
35E49243-3CA8-4F5A-9875-DA3792833D4A.jpeg (146.9 KiB) Viewed 1833 times

Online
User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18776
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: Rear washer jet?

Post by X5Sport » Tue Sep 29, 2020 1:04 pm

Have you had a look at newtis.info? Copy of the official BMW tech instructions (aka Haynes Manual) on line. It should at least tell you how to get at it - assuming no one on here knows or has done the same.
:ant: Never anthropomorphise computers. They hate that.

Raj
Lifer
Lifer
Posts: 4512
Joined: Tue Sep 21, 2010 11:30 pm
Location: Midlands

Re: Rear washer jet?

Post by Raj » Thu Oct 01, 2020 2:53 pm

You just need to remove the plastic trim that runs along the top of the bootlid. There's something like 5 press in clips but you do need to give it a bit of a pull/pry. That will give you access to the jet.

Another thing to try is swapping the pumps over in there washer bottle as although you can hear the pump if it's had it it may spin but not provide adequate pressure to actually fir the water out.

Rocky-S
Newbie
Newbie
Posts: 15
Joined: Mon Aug 10, 2020 2:03 pm

Re: Rear washer jet?

Post by Rocky-S » Thu Oct 01, 2020 7:15 pm

Didn’t know anything about an online manual so thanks for that. Regarding swapping the pumps over,does the washer bottle need to be removed or can you do it in situ?

Raj
Lifer
Lifer
Posts: 4512
Joined: Tue Sep 21, 2010 11:30 pm
Location: Midlands

Re: Rear washer jet?

Post by Raj » Fri Oct 02, 2020 10:36 am

Rocky-S wrote: Thu Oct 01, 2020 7:15 pm Didn’t know anything about an online manual so thanks for that. Regarding swapping the pumps over,does the washer bottle need to be removed or can you do it in situ?
Depends usually do need to raise it out the way to get to the pumps themselves. Worth checking the pipework in the bottled first by removing the trim and checking.

Post Reply