Hello!
I have a BMW X5, 2013 (3.0D M Sport) and recently ive noticed when breaking, particularly when crawling and then slowly breaking there is a horrid squealing noise coming from the front set of wheels. This doesnt happen every time I break, only when its a rolling start then stop, similar to when you go through a drive-through
Ive got a short video where you can hear the noise but cant seem to attach it to this post. Ive had it in at the garage and the break pads aren't worn, about another 6+ months on them. Could there possibly be another reason this is happening when breaking?
Cheers!
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Noise when breaking
-
- Newbie
- Posts: 2
- Joined: Sun May 21, 2017 8:57 pm
Noise when breaking
Last edited by jordanthomson91 on Wed Jun 06, 2018 9:47 pm, edited 1 time in total.
Re: Noise when breaking
If you only got 6 months left on them that would suggest they have been in there for some time, the squealing is more than likely a high frequency vibration (not felt) between the caliper piston and the back plate of the pad, normally cured by putting some copper slip grease between the piston and pad back plate
E53 X5 4.6is, Carbon Black, LPG, Paddle Shift, Dynavin N6, Lowered, 22"Wheels, Side Bars. Perfusion Exhaust
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone
Re: Noise when breaking
I would get new pads fitted and see if that cures it but i think it will.(don't forget the copper-slip)
Re: Noise when breaking
Deffo Pads.....