Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

any suggestions

Discuss the problems with your X5 (E53).
Post Reply
mark1989
Newbie
Newbie
Posts: 6
Joined: Thu Oct 12, 2017 5:36 pm

any suggestions

Post by mark1989 » Wed Nov 08, 2017 8:15 pm

im woundering if people could help on problem ive just got..

ive done some recent work new battery & alternator as the car wasnt holding charge.. new bosche maf as old 1 was broke .. few vac pipes and new gaskets ..

running loverly for few days until i got the "gearbox programme safe mode thing on dash"  stuck in 3rd gear .. this will disapear if i turn off and on but 4th and 5th have gone ..  if i drive in manual i wont get the light comin on but 4th -5th it wont even try change .. if i drive in "D or sport i get a smooth shift 1-2-3 but no 4-5 and then ill get light back on if i speed up to much  .. no nasty noises no jerking wat so ever ..

User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18777
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: any suggestions

Post by X5Sport » Wed Nov 08, 2017 8:26 pm

I would really recommend you get an error code read done.  The battery voltage causing a gearbox error goes away immediately.  If yours is coming back that points at a potential transmission issue.  Given repairs can cost £2k, a code read could save you money in case something has really gone bad and the box is correctly in protect mode
:ant: Never anthropomorphise computers. They hate that.

mark1989
Newbie
Newbie
Posts: 6
Joined: Thu Oct 12, 2017 5:36 pm

Re: any suggestions

Post by mark1989 » Wed Nov 08, 2017 8:45 pm

[quote="X5Sport"]
I would really recommend you get an error code read done.  The battery voltage causing a gearbox error goes away immediately.  If yours is coming back that points at a potential transmission issue.  Given repairs can cost £2k, a code read could save you money in case something has really gone bad and the box is correctly in protect mode
[/quote]

my mechanic did plug in and reset if i remember it logged 4th & 5th misfuntion .. i will ask him & confirm these codes that we got .. voltage wise on battery  we got correct leveĺs present  .. he did suggest having a gearbox oil change but im not conviced thats the problem as not even trying change to 4th & 5th in manual mode it like the computer shut it off ..
Last edited by mark1989 on Wed Nov 08, 2017 9:35 pm, edited 1 time in total.

User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18777
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: any suggestions

Post by X5Sport » Wed Nov 08, 2017 10:03 pm

You need those codes as it could be as simple as low fluid level, or a failed solenoid shift valve (easier to fix and common on that box) or a box out and replace all clutch & brake packs, or torque convertor......or others I can’t think of that have affected others on here.

If you do get a hydraulic pressure loss though that will very likely be a rebuild.
:ant: Never anthropomorphise computers. They hate that.

mark1989
Newbie
Newbie
Posts: 6
Joined: Thu Oct 12, 2017 5:36 pm

Re: any suggestions

Post by mark1989 » Wed Nov 22, 2017 12:10 am

little update .. car got scanned and reset again .. fault showing is " gear monitoring 4 "

User avatar
X5Sport
Global Moderator
Global Moderator
Posts: 18777
Joined: Fri Sep 03, 2010 4:09 pm
Location: Planet X6......

Re: any suggestions

Post by X5Sport » Wed Nov 22, 2017 8:47 am

Clutch slipping on ratio 4 is what the web reports that as.  A chat with a specialist will tell you where next.  Could be bad fluid but if it really is slipping then a rebuild maybe on the cards unfortunately.  :(
:ant: Never anthropomorphise computers. They hate that.

mark1989
Newbie
Newbie
Posts: 6
Joined: Thu Oct 12, 2017 5:36 pm

Re: any suggestions

Post by mark1989 » Wed Nov 22, 2017 9:00 am

yeah i understand rebuild could be on the cards .. never felt slipping tho but then it doesnt change to 4-5 at minute due to problem although 1-2-3 is strong even on boost .

Post Reply