Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.

Knock/rattle

Discuss the problems with your X5 (E53).
Post Reply
User avatar
henrym3
Snr Member
Snr Member
Posts: 1885
Joined: Wed May 25, 2016 11:07 pm
Location: Bournemouth

Knock/rattle

Post by henrym3 » Tue Oct 03, 2017 11:12 pm

Need a quick answer or experienced opinion. Got the above on front right suspension, recently replaced the link arms (lemforder)) can't see or feel anything loose although I haven't had time to jack car up yet, what's the likelihood of it being the top mount bearing. One minute driving fine, next rattling like mad over ripples in road or cats eyes. Cheers in advance
E53 X5 4.6is, Carbon Black, LPG, Paddle Shift, Dynavin N6, Lowered, 22"Wheels, Side Bars. Perfusion Exhaust
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone

graemeX5
Snr Member
Snr Member
Posts: 1927
Joined: Mon Jan 16, 2012 12:01 pm
Location: Hertfordshire

Re: Knock/rattle

Post by graemeX5 » Wed Oct 04, 2017 8:25 am

Hi Henry

I am more expert but see link for realoem
http://www.realoem.com/bmw/enUS/partgrp ... 46is&mg=31

Looking at the above there are the lower control arms and the radius rods from the front back to the strut on each side, if you have replaced the control arms then worth checking the radius rods for play as these have bushes and links, if not it could be the stabiliser bar.

I think that both Horizon and X5 Salisbury have done a lot of work on theses cars and will know more.

Graeme
Now: E70 X5 in Blue, 3 Minis Cooper S R53, JCW R56 & Cooper S Roadster R59 :drive:

Prev: Abarth 595C & 500C, E53 X5 4.4i, E88 135i M Sport, Audi TT Mk1 V6, 3 Smarts, 8 Vauxhalls, 4 Fords, 2 Triumphs, 1 Mini & Bikes

User avatar
henrym3
Snr Member
Snr Member
Posts: 1885
Joined: Wed May 25, 2016 11:07 pm
Location: Bournemouth

Re: Knock/rattle

Post by henrym3 » Wed Oct 04, 2017 6:58 pm

Solved, a loose caliper mounting bolt. Should have noticed sooner that the rattle stopped when brakes were applied :axe:
E53 X5 4.6is, Carbon Black, LPG, Paddle Shift, Dynavin N6, Lowered, 22"Wheels, Side Bars. Perfusion Exhaust
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone

Post Reply