Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
3.0d cracked manifold
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
3.0d cracked manifold
Hey guys
I've been getting a bit of exhaust fume on cold start into the cab so today I started the car with the bonnet up.......was like a smokey cavern lol
It's the same dry horrible smell I get from the back of the car when I cold start it.
3 questions.....
1- how much are bmw gonna spank me for a new manifold?
2- is there a decent aftermarket one that's considerably cheaper?
3-how long will it take a garage to change roughly?
2004 facelift 3.0d sport
I've been getting a bit of exhaust fume on cold start into the cab so today I started the car with the bonnet up.......was like a smokey cavern lol
It's the same dry horrible smell I get from the back of the car when I cold start it.
3 questions.....
1- how much are bmw gonna spank me for a new manifold?
2- is there a decent aftermarket one that's considerably cheaper?
3-how long will it take a garage to change roughly?
2004 facelift 3.0d sport
- Steamyrotter
- Snr Member
- Posts: 1304
- Joined: Sat Jul 31, 2010 11:06 pm
Re: 3.0d cracked manifold
Do a quick search on here...
Its been done already.
It looks like going for a cast manifold, rather than the OEM steel one, is probably a better investment.
Seem to remember around £300 to buy..
Not sure how much BMW would charge to fit.. wouldn't expect much change from a grand????
Its been done already.
It looks like going for a cast manifold, rather than the OEM steel one, is probably a better investment.
Seem to remember around £300 to buy..
Not sure how much BMW would charge to fit.. wouldn't expect much change from a grand????
If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="Steamyrotter"]
Do a quick search on here...
Its been done already.
It looks like going for a cast manifold, rather than the OEM steel one, is probably a better investment.
Seem to remember around £300 to buy..
Not sure how much BMW would charge to fit.. wouldn't expect much change from a grand????
[/quote]
I would get my local indy to fit it buddy. Any idea where I can buy a cast one?
Do a quick search on here...
Its been done already.
It looks like going for a cast manifold, rather than the OEM steel one, is probably a better investment.
Seem to remember around £300 to buy..
Not sure how much BMW would charge to fit.. wouldn't expect much change from a grand????
[/quote]
I would get my local indy to fit it buddy. Any idea where I can buy a cast one?
Re: 3.0d cracked manifold
Well you could try typing 'BMW X5 exhaust manifold' into a search engine coz you'll get this lot..... :xmastongue:
http://www.ebay.co.uk/bhp/bmw-x5-exhaust-manifold
You have an M57 engine, likely an M57TU D30 or very similar. Loads to choose from and used in all cars fitted with that lump.
http://www.ebay.co.uk/bhp/bmw-x5-exhaust-manifold
You have an M57 engine, likely an M57TU D30 or very similar. Loads to choose from and used in all cars fitted with that lump.
Last edited by X5Sport on Tue Dec 20, 2016 3:15 pm, edited 1 time in total.
Never anthropomorphise computers. They hate that.
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="X5Sport"]
Well you could try typing 'BMW X5 exhaust manifold' into a search engine coz you'll get this lot..... :xmastongue:
http://www.ebay.co.uk/bhp/bmw-x5-exhaust-manifold
You have an M57 engine, likely an M57TU D30 or very similar. Loads to choose from and used in all cars fitted with that lump.
[/quote]
aahhh sarcasm..........the lowest form of wit ) ) )
i simply havent had the time to research it yet thats all.
just regarding the cheap ones listed on ebay................im coming froma subaru background and the cheaper stuff from ebay was always a big NO NO, ive had cheap aftermarket exhausts from ebay that were a pain in the ass to fit. buy cheap-buy twice was a saying i got familiar with.
has anybody had experience of these cheap manifolds? any particular seller i should use? are the cheaper gaskets that come with it any good?
also is there any other jobs worth doing while the manifold is being changed?
sorry for all the questions guys but im in a bit of a pickle as im working a shit load of hours to finish up before xmas.
thanks for all the help and by the way..............£380+ vat for a genuine bmw manifold........piss off springs to mind lol
Well you could try typing 'BMW X5 exhaust manifold' into a search engine coz you'll get this lot..... :xmastongue:
http://www.ebay.co.uk/bhp/bmw-x5-exhaust-manifold
You have an M57 engine, likely an M57TU D30 or very similar. Loads to choose from and used in all cars fitted with that lump.
[/quote]
aahhh sarcasm..........the lowest form of wit ) ) )
i simply havent had the time to research it yet thats all.
just regarding the cheap ones listed on ebay................im coming froma subaru background and the cheaper stuff from ebay was always a big NO NO, ive had cheap aftermarket exhausts from ebay that were a pain in the ass to fit. buy cheap-buy twice was a saying i got familiar with.
has anybody had experience of these cheap manifolds? any particular seller i should use? are the cheaper gaskets that come with it any good?
also is there any other jobs worth doing while the manifold is being changed?
sorry for all the questions guys but im in a bit of a pickle as im working a shit load of hours to finish up before xmas.
thanks for all the help and by the way..............£380+ vat for a genuine bmw manifold........piss off springs to mind lol
Re: 3.0d cracked manifold
2011 Kia Sorento KX3 2.2D 60 Plate Auto in black ( mine )
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="Horizon"]
http://xdrivers.co.uk/forum/index.php/t ... #msg103096
[/quote]
thanks horizon
there isnt anything else that it could be is there before i go and spudge my cash on a manifold
http://xdrivers.co.uk/forum/index.php/t ... #msg103096
[/quote]
thanks horizon
there isnt anything else that it could be is there before i go and spudge my cash on a manifold
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
think i will get a set of injector seals aswell...just incase.
gonna go with that manifold of ebay from that romin guy
gonna go with that manifold of ebay from that romin guy
-
- Snr Member
- Posts: 1339
- Joined: Sun May 25, 2014 11:13 pm
Re: 3.0d cracked manifold
I have similar exhaust smoke under the bonnet... turns out to be the turbo charger to Downpipe gasket...
unfortunately, the whole top end of the engine ancilleries need to come off...
at the same time I will change the AC pump, as it is inaccessible from below for the feed pipes...
i bought a new Cast Manifold + studs, gaskets, seals & turbo gasket from ebay for under £100...
so this little job is waiting for a dry sunny "weekend" ...
it will take a few hrs of removing parts before I can even SEE the manifold, let alone remove it ...
happy days eh !!!
unfortunately, the whole top end of the engine ancilleries need to come off...
at the same time I will change the AC pump, as it is inaccessible from below for the feed pipes...
i bought a new Cast Manifold + studs, gaskets, seals & turbo gasket from ebay for under £100...
so this little job is waiting for a dry sunny "weekend" ...
it will take a few hrs of removing parts before I can even SEE the manifold, let alone remove it ...
happy days eh !!!
Re: 3.0d cracked manifold
Good luck with the "dry sunny weekend"
E53 X5 4.6is, Carbon Black, LPG, Paddle Shift, Dynavin N6, Lowered, 22"Wheels, Side Bars. Perfusion Exhaust
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone
E30 M3 Black, S50B32 Engine, 6 Speed Box, Ireland Engineering ARBs & Big Brake Conversion, Lowered, 18"LMs, CF CAI, CF Splitter & Barge Board, ZM3 Quad Exhaust.
VW R32 Gone
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="X5-D-Sport Salisbury"]
I have similar exhaust smoke under the bonnet... turns out to be the turbo charger to Downpipe gasket...
unfortunately, the whole top end of the engine ancilleries need to come off...
at the same time I will change the AC pump, as it is inaccessible from below for the feed pipes...
i bought a new Cast Manifold + studs, gaskets, seals & turbo gasket from ebay for under £100...
so this little job is waiting for a dry sunny "weekend" ...
it will take a few hrs of removing parts before I can even SEE the manifold, let alone remove it ...
happy days eh !!!
[/quote]
even if that turns out to be whats wrong with mine i will get the garage to change the manifold while its there.
should i be getting an inlet manifold gasket aswell?
I have similar exhaust smoke under the bonnet... turns out to be the turbo charger to Downpipe gasket...
unfortunately, the whole top end of the engine ancilleries need to come off...
at the same time I will change the AC pump, as it is inaccessible from below for the feed pipes...
i bought a new Cast Manifold + studs, gaskets, seals & turbo gasket from ebay for under £100...
so this little job is waiting for a dry sunny "weekend" ...
it will take a few hrs of removing parts before I can even SEE the manifold, let alone remove it ...
happy days eh !!!
[/quote]
even if that turns out to be whats wrong with mine i will get the garage to change the manifold while its there.
should i be getting an inlet manifold gasket aswell?
Re: 3.0d cracked manifold
I had a slight smell of exhaust (very faint, only I noticed it rather than passengers) and I thought it could be an exhaust leak or manifold crack, but as you can't even see the manifold I thought Id try the cheapest thing first, and that's change the cabin filter. Its made all the difference.
For your issue though, if you can actually see the smoke in the engine bay that's much more significant than the issue I had
For your issue though, if you can actually see the smoke in the engine bay that's much more significant than the issue I had
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="shak"]
I had a slight smell of exhaust (very faint, only I noticed it rather than passengers) and I thought it could be an exhaust leak or manifold crack, but as you can't even see the manifold I thought Id try the cheapest thing first, and that's change the cabin filter. Its made all the difference.
For your issue though, if you can actually see the smoke in the engine bay that's much more significant than the issue I had
[/quote]
thanks for the reply, i will grab a cabin filter aswell-chances are its not been changed in a while.
where abouts is the cabin filter?
I had a slight smell of exhaust (very faint, only I noticed it rather than passengers) and I thought it could be an exhaust leak or manifold crack, but as you can't even see the manifold I thought Id try the cheapest thing first, and that's change the cabin filter. Its made all the difference.
For your issue though, if you can actually see the smoke in the engine bay that's much more significant than the issue I had
[/quote]
thanks for the reply, i will grab a cabin filter aswell-chances are its not been changed in a while.
where abouts is the cabin filter?
Re: 3.0d cracked manifold
Cabin filter is on the bulkhead under the bonnet in the panel above the rear of the engine.
I get mine from Euro Car Parts.
I get mine from Euro Car Parts.
2011 Kia Sorento KX3 2.2D 60 Plate Auto in black ( mine )
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
BMW E83 X3. 3.0d M Sport, 2008 in black ( now gone )
BMW E93 330i Convertible Msport 2007. ( Now sold )
VW Golf 2.0 TDI 140 GT 2010 ( now sold )
Now Sold 55 plate, X5, 3.0 D Sport. Silv
-
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: 3.0d cracked manifold
[quote="Horizon"]
Cabin filter is on the bulkhead under the bonnet in the panel above the rear of the engine.
I get mine from Euro Car Parts.
[/quote]
cheers, ive just watched a quick vid on youtube..........mega easy.
ive been on ecp and they offer 2 for my x5........is there 1 in the cab aswell?
http://www.eurocarparts.com/pollen-filter
Cabin filter is on the bulkhead under the bonnet in the panel above the rear of the engine.
I get mine from Euro Car Parts.
[/quote]
cheers, ive just watched a quick vid on youtube..........mega easy.
ive been on ecp and they offer 2 for my x5........is there 1 in the cab aswell?
http://www.eurocarparts.com/pollen-filter