i went work this morning and was met with the check numberplate light message.
before i go thumping around the arse end of my car.........is it an easy fix or is it a typical bumper off/diff out/gearbox out/bootlid off job to replace a sodding bulb? also what type of bulb please.
cheers guys
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
check numberplate light message
Re: check numberplate light message
Really simple job "any competent mechanic with a Garage and a few helpers can sort these in a couple of days"
Seriously though it is a straight forward job on mine it wasn't actually the bulb it was corrosion on the holder still only took 10 minutes to clean with a Dremel and refit with a dob of grease to slow down future corrosion.
Seriously though it is a straight forward job on mine it wasn't actually the bulb it was corrosion on the holder still only took 10 minutes to clean with a Dremel and refit with a dob of grease to slow down future corrosion.
4.6is X5 Estoril Blue (current)
4.4 X5 Sport Topaz Blue LPG (now gone squashed by a tree)
Subaru Outback 3.0 Rn Star Silver (current)
AMG 6.3 CLS Obsidian Black (sold)
4.4 X5 Sport Topaz Blue LPG (now gone squashed by a tree)
Subaru Outback 3.0 Rn Star Silver (current)
AMG 6.3 CLS Obsidian Black (sold)
-
OnlineX5Sport
- Global Moderator
- Posts: 18784
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: check numberplate light message
[quote="the shreksta"].......is it an easy fix or is it a typical bumper off/diff out/gearbox out/bootlid off job to replace a sodding bulb?
[/quote]
Cynic! You have owned BMWs for too long
)
I think it is a C5W type
Video to help.
[/quote]
Cynic! You have owned BMWs for too long
)I think it is a C5W type
Video to help.
Last edited by X5Sport on Fri Dec 16, 2016 6:22 pm, edited 1 time in total.
Never anthropomorphise computers. They hate that.-
the shreksta
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: check numberplate light message
video not working
-
OnlineX5Sport
- Global Moderator
- Posts: 18784
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: check numberplate light message
Rechecked and it's fine on my PC (Win7) and iPad.....should be OK for you then ??? Unless your browser is locking out the video plugin perhaps? Some are now refusing anything not coded in HTML5 (such as Flash)
Last edited by X5Sport on Sat Dec 17, 2016 9:14 am, edited 1 time in total.
Never anthropomorphise computers. They hate that.Re: check numberplate light message
Hopefully its just the bulb when mine went a wire had a snapped in the loom where it enters the tailgate!
-
the shreksta
- Member
- Posts: 386
- Joined: Sun Oct 04, 2015 5:41 pm
Re: check numberplate light message
[quote="strummer"]
Hopefully its just the bulb when mine went a wire had a snapped in the loom where it enters the tailgate!
[/quote]
right i have just checked the numberplate lights and they are both working yet im still getting the message.............any ideas?
Hopefully its just the bulb when mine went a wire had a snapped in the loom where it enters the tailgate!
[/quote]
right i have just checked the numberplate lights and they are both working yet im still getting the message.............any ideas?
Re: check numberplate light message
[quote="the shreksta"]
[quote="strummer"]
Hopefully its just the bulb when mine went a wire had a snapped in the loom where it enters the tailgate!
[/quote]
right i have just checked the numberplate lights and they are both working yet im still getting the message.............any ideas?
[/quote]
I seem to remember the warning comes up when resistance is lower and as the bulb wears it's resistance gets lower. Not enough to have the bulb gone but enough to give the warning. Change the bulbs and no more warning.
No doubt, anyone familiar with electrickery will know what happens but I remember this from my 540i.
[quote="strummer"]
Hopefully its just the bulb when mine went a wire had a snapped in the loom where it enters the tailgate!
[/quote]
right i have just checked the numberplate lights and they are both working yet im still getting the message.............any ideas?
[/quote]
I seem to remember the warning comes up when resistance is lower and as the bulb wears it's resistance gets lower. Not enough to have the bulb gone but enough to give the warning. Change the bulbs and no more warning.
No doubt, anyone familiar with electrickery will know what happens but I remember this from my 540i.
06 Range Rover Vogue SE 4.2 SC
05 Mercedes SL350
05 Mercedes SL350
-
briankerrys47
- Member
- Posts: 315
- Joined: Mon Dec 03, 2012 1:55 pm
- Location: East of Manchester
Re: check numberplate light message
Spot on Denise O,drove me mad every one on the rear all worked!!! Checked over a period of a month ?? On MOT a shed them to check, new bulb and some work on holder message gone.