Please Help - PCV changed but Oil still in air intake going to Turbo

[salvy111]

So I changed the PCV to a later vortex model and cleaned up the mess it had caused.

Unfortunately over the next few days I had the same burst of white smoke from the exhaust.

So again I took the inlet snorkle off and found oil dripping through the above circled hose.

Can anyone help by telling me where this oil is coming from ?

Many thanks in advance.... 

[mikesmith2939]

Could be the seals in the turbo going, if too much oil gets in the engine will run on that at full revs.

Best get it checked out.

[X5Sport]

+1.  Look for diesel runaway on YouTube.  It's rare, but usually fatal to the engine.