Washing the car yesterday, and doing my usual weekly vehicle check. I notice the front tyres are starting to wear a little more on the outside shoulders, compared to the centre area. They are set to 32psi which is the recommended pressure on the B pillar.
The car has done 8000 miles and drives straight, no pulling.
Should i increase the psi?
I had it set to 34psi front/36psi rear initially, but the main dealer lowered them to 32f/33r when it went in for a window seal replacement.
What psi do you set on 19" staggered rft's?
Do you notice increased shoulder wear?
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Increased shoulder wear
Increased shoulder wear
F25 x30d M Sport Lci. Prof Media/Nav, adaptive xenons,ext storage,lights package, 19" Staggered 622M alloys.
-
OnlineX5Sport
- Global Moderator
- Posts: 18774
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Increased shoulder wear
32psi all round worked fine for me. There's a label on the B-pillar with that data including wheel sizes and load.
It's more likely to be a tracking error, and this wear pattern is very common on the E53.
It's more likely to be a tracking error, and this wear pattern is very common on the E53.
Never anthropomorphise computers. They hate that.Re: Increased shoulder wear
What make of tyre?
They don't all wear like a Michelin!
They don't all wear like a Michelin!
Re: Increased shoulder wear
Pirelli p zero runflats at the moment
F25 x30d M Sport Lci. Prof Media/Nav, adaptive xenons,ext storage,lights package, 19" Staggered 622M alloys.