bluetooth iphone cradle

BL02WAS · Post by **BL02WAS** » Tue Jan 11, 2011 11:57 pm

hi all, im after the cradle that sits in the middle armrest for tge e53 bluetooth system so will be able to charge the phone up etc, am i right in thinking you have to purchase the e70 cradle and file it down to fit?? sanj, i remember you have done this?? yes? am i correct in what im saying? and is this all i need??

Sent from my iPhone using Tapatalk

Sanj · Post by **Sanj** » Wed Jan 12, 2011 12:06 am

I didn't do this, pewters has.

But yes, E70 cradle and file the edges where it will sit in the armrest to make them wider.

Searched for pewters and cradle couldn't find anything, he had a photo too, could have been posted on the old forum...

BL02WAS · Post by **BL02WAS** » Wed Jan 12, 2011 4:59 am

thanks for that, if you look on ebay now, a chap seems to have loads of them for sale, so i think you will get one for Â£30 which i think im going to do!!

Sent from my iPhone using Tapatalk

x555 · Post by **x555** » Wed Jan 12, 2011 7:35 am

Yep defo Pewters and it was the old forum.

philip600 · Post by **philip600** » Wed Jan 19, 2011 10:45 pm

Hi,

I was looking into doing this for my i-phone 4, did the OP manage to get E70 cradle to fit & work ?
Someone on e-bay that was selling these & had the E53 listed as compatible but when I e-mailed to ask him to confirm, he admitted he didn't really know & advised I check with BMW !

Phil.

X5Sport · Post by **X5Sport** » Thu Jan 20, 2011 2:46 pm

For info, I spoke to our local Parts Team and asked what the story was with the iPhone4 cradles for BMWs. He didn't know, but he asked BMW GB and got a slightly less than helpful answer which was that BMW are awaiting sufficient stock from the manufacturer and will then test all three (yes there will be three different) versions to ensure that they are fully compatible with supported vehicles. Costs range from around Â£80 to about Â£130 - dependant upon version. I think one is basic bluetooth only, the next does music too and the third allows video media, but it wasn't clear how the bl;uetooth function was maintained for the second and third variant.

Now forgive me for thinking this, but when I was an injineer, we tested products before they went into production and then batch sampled as we went - say 1% - if the failure rate was low, more if there was an issue or a MOD carried out. Mission critical hardware was always 100% tested as it came off the line. We certainly didn't build 25,000 units and only then see if they worked as required!! This BMW answer did raise my eybrows somewhat and either meant the person at BMW GB was talking from the wrong orifice, or the Google translation hadn't worked.

BMW Dealer Parts were puzzled too.

as400 · Post by **as400** » Thu Jun 23, 2011 11:07 am

Is there any update on this?....pressume if an E53 has bluetooth compatability then iphones work no problem?...do they play through the hifi system?

Kris2011 · Post by **Kris2011** » Thu Jun 23, 2011 4:37 pm

I asked a parts guy in Cotswold BMW.

He said that BMW sold both the Eject Box and Snap In Cradle for the iPhone 4 to fit the E53. You have to buy both, but the best part about it was that a couple of customers had tried them and they don't fit the iPhone 4. IIRC price was around Â£170, but I could be making that up.

By doing this the two advantages were charging the iPhone in the centre armrest and taking advantage of the vehicle's aerial for signal quality. There isn't an option to connect to the car's entertainment system.

Kris

EXPLORER · Post by **EXPLORER** » Fri Dec 23, 2011 7:08 pm

Just fitted part number 84 21 2 158 682 iphone cradle, for 3g to my e53 x5 d
and can confirm it fits[ push fit] ,yes it is a shade tight]by it self with no other parts required, , and works fine, bluetooth charging etc, no cutting /grinding etc

pvr · Post by **pvr** » Fri Dec 23, 2011 7:46 pm

But the iPhone 3 is very different from the 4 though.

XSeries-forum

XSeries-forum