Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Audio help needed...
Audio help needed...
Good afternoon folks, I need a bit of help audio wise ....I had a look in my boot today (2001. 3.0) I see the battery is under the hydraulic? Pneumatic? suspension dome, it seems there is a hefty set of phono cables coming from the direction of the battery? There is also a blue wire going toward the battery (switch live?) I can also see a chunky power wire and huge inline fuse. Am I to assume someone has previously fitted an aftermarket amp? I have the factory wide screen satnav. I am now wondering if I could drop in an active sub box? Does this all sound plausible or am I completely wrong??
Re: Audio help needed...
For starters:

Then....
Yes it sounds like an after market unit has been fitted. That doesn't mean you can fit a sub now either. You need to check where these wires go first (not that simple).

Then....
Yes it sounds like an after market unit has been fitted. That doesn't mean you can fit a sub now either. You need to check where these wires go first (not that simple).
Scn Protect,Alarm Chirp,Ashtray del,Sub install,IV2,Screens,PS2 Media,Chrome rings,Schnitzer pedals,Reverse cam,Silver Grills,F/mirrors,Comp Spkrs,Heated S/W,20"168s,Splash scn,Arches,Remap,LED Tails,ACS Spoiler,'is' Bumper Trim,Rear heated seats,Rear blinds
Re: Audio help needed...
you could use some RCA splitters if you only have 1 output
- Steamyrotter
- Snr Member
- Posts: 1304
- Joined: Sat Jul 31, 2010 11:06 pm
Re: Audio help needed...
Unfortunately standard BMW electronics for these do not support RCA outputs..
You can get the BM54 unit modified to give them though..
You might have to use line level convertors to get the right levels, or feed from speaker lines into appropriate Amp inputs.
You can get the BM54 unit modified to give them though..
You might have to use line level convertors to get the right levels, or feed from speaker lines into appropriate Amp inputs.
If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Re: Audio help needed...
the op said he had phono cables already so presumed he meant RCA leads, they must go to an amp, possibly have preouts on that AMP you could use or you could could use Bavis to put some preouts on your bm54.. he has just done some for me.. great job too