Is there a way to fix this, dessicants etc, or can this be replaced?
Instrument cluster display not displaying properly.
Not joined yet? Register for free and enjoy features such as alerts, private messaging and viewing latest posts and topics.
Instrument cluster display
Instrument cluster display
Owner of the Ultimate Labrador Carriage
2003/53 4.6IS E53
2003/53 4.6IS E53
-
OnlineX5Sport
- Global Moderator
- Posts: 18781
- Joined: Fri Sep 03, 2010 4:09 pm
- Location: Planet X6......
Re: Instrument cluster display
Have a look for cluster pixel fix on here. It's a common issue.
Richard
Richard
Never anthropomorphise computers. They hate that.
Re: Instrument cluster display
Cheers didn't know what wording to use, I have found many examples of lamp replacement but not the actual strip of LCD display
Owner of the Ultimate Labrador Carriage
2003/53 4.6IS E53
2003/53 4.6IS E53
- Steamyrotter
- Snr Member
- Posts: 1304
- Joined: Sat Jul 31, 2010 11:06 pm
Re: Instrument cluster display
Its a ribbon cable issue normally.
They can be changed, depending on your abilities and bravery...
Or there are places that will do it for you.
I did mine and it makes all the difference. Its all the little details that matter
Didn't take too long but did require drilling out parts of the dash as i didn't want to risk the dials by removing the pointers..
When its back together you cant see where it was drilled as long as you do it properly
They can be changed, depending on your abilities and bravery...
Or there are places that will do it for you.
I did mine and it makes all the difference. Its all the little details that matter
Didn't take too long but did require drilling out parts of the dash as i didn't want to risk the dials by removing the pointers..
When its back together you cant see where it was drilled as long as you do it properly
If things were meant to be easy, then I will soon complicate them....
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Please note...
Anything I say is only from my personal experience and knowledge..
I don't assume to know everything, and know there is a lot I don't know..
But then I could be talking bollox.. O:-)
Re: Instrument cluster display
Just done mine recently best bet is to buy the screen with the ribbon attached it's not to bad to fit. As mentioned you do have to drill the housing so if your not brave the have it done for you. Got my screen from eBay here's the one I used http://www.ebay.co.uk/itm/261508423936 the seller is spot on give him a call if your unsure of what kind of a job it is.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Re: Instrument cluster display
I changed mine with one I bought from Ebay, it's an awful job 1st time around and the template they sent for drilling the holes didn't line up with my clocks, fortunately I checked the rear of the instrument to locate the screws and drilled it ok.
It's fiddly to say the least and it's one of those jobs that when I started I wished I'd just paid the £80 and got it done for me.
If I ever do another one I'll invest in a fibre glass pencil to clean the contacts on circuit board 1st to make sure it's properly clean.
It's fiddly to say the least and it's one of those jobs that when I started I wished I'd just paid the £80 and got it done for me.
If I ever do another one I'll invest in a fibre glass pencil to clean the contacts on circuit board 1st to make sure it's properly clean.
Re: Instrument cluster display
im facing the same problem on my e53 at the moment , the lcd is terrible on mine , loads of pixels dead, I don't fancy doing it myself , has any one sent there's off to get repaired?.
I don't fancy sending my cluster off to just any one.
I don't fancy sending my cluster off to just any one.
2002 e53 4.4 tempremental
2001 suzuki Hayabusa just for fun
2001 suzuki Hayabusa just for fun
Re: Instrument cluster display
The seller I listed above seemed very good I was on the phone nearly an hour with him about doing the cluster myself. He was really helpful and they do work for the dealer network.
There no. Is on the ebay listing give em a call.
There no. Is on the ebay listing give em a call.