Replacing facelift d exhaust manifold

mikem · Post by **mikem** » Fri Aug 08, 2014 10:53 pm

Has anyone replaced the stainless one with a cast iron piece on a facelift car ?

Jumped in the wife's car tonight for the first time in about 2 months and thought my eyes were blurred then realised the car was smokey inside. Of course the wife claims it's never, ever done that before. ::)

Bargain Bucket · Post by **Bargain Bucket** » Sat Aug 09, 2014 10:09 am

Did it about 4 weeks ago. Not too bad a job but I guess it depends on how much mechanical experience you have. Some good guides on this forum.

mikem · Post by **mikem** » Sat Aug 09, 2014 10:59 am

Cool. Which manifold did you use ? Trying to weigh up using an early genuine one against a later design non genuine. Realise the early one will loose a bit of power but the car is remapped anyway.

Bargain Bucket · Post by **Bargain Bucket** » Sat Aug 09, 2014 4:50 pm

I used one of these. It has the same split chamber as the OEM stainless so shouldn't lose you any power.

http://www.ebay.co.uk/itm/200984412537? ... 1497.l2649

AW8 · Post by **AW8** » Sat Aug 09, 2014 6:23 pm

[quote="mikem"]
Has anyone replaced the piece of shit BMW one with a cast iron piece on a facelift car ?

Jumped in the wife's car tonight for the first time in about 2 months and thought my eyes were fucked the. Realised the car was smokey inside. Of course the wife claims it's never, ever done that before. ::)
[/quote]

ADMIN POST

No hard and fast rules on swearing here, but no real need for the above & considering the context. Not wanting to initiate further chat about this, however, the fact it has been flagged up to me indicates I am not alone in terms of what I consider acceptable on here.....it's not just about actual words but also about tone and etiquette.

Not a massive deal you aren't 1st and won't be the last...many things get typed on forums and some are sponsored by a beer or two

Regards AW8

mikem · Post by **mikem** » Sun Aug 10, 2014 1:09 pm

Thanks Bargain Bucket, that was the one I was looking at

mikem · Post by **mikem** » Sun Aug 10, 2014 1:15 pm

AW8, my Question and delivery was a little blunt. Will bear it mind for future.

I could've called it far worse though

AW8 · Post by **AW8** » Sun Aug 10, 2014 5:32 pm

mikem · Post by **mikem** » Thu Aug 14, 2014 10:26 pm

New manifold has arrived, going on Saturday.

mikem · Post by **mikem** » Sat Aug 16, 2014 6:39 pm

My "old one" looks quite new but had a perfect split along a crease about 2" long. Would've been quite easy to weld but looked like it was starting to go in other places.

The replacement is a perfect fit with no issues. Car seems to be pulling much better now and turbo is quieter (turbo gasket had started to blow through)

Great service from the seller, for future reference guys.

XSeries-forum

XSeries-forum

Replacing facelift d exhaust manifold

Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold

Re: Replacing facelift d exhaust manifold