4754D609-39F6-4E1C-AA97-0C4F35F715D3.png That is a picture of a 2005 3ltr d and item 9 is a relay. So I assume you have one tucked away somewhere if the relay was faulty, I would not be able to control the suspension from Inpa. Reading this through again it’s quite likely the wiring to the sensors a ...

henrym3 wrote: ↑Sat Jan 14, 2023 9:03 pm 4754D609-39F6-4E1C-AA97-0C4F35F715D3.png
That is a picture of a 2005 3ltr d and item 9 is a relay. So I assume you have one tucked away somewhere

if the relay was faulty, I would not be able to control the suspension from Inpa.

Hi, I took a look today there is no relay next to the module, I had a thought, if I connect through Inpa and control each side individually and both together then it could not be a relay. So it all points to the level sensors, but they have been replaced. So back to square one. I might have to take ...

Thank you very much, I will try the relay, to be honest didn’t think about a relay, to busy on the more technical side. I will order a new relay. I’ll let you know how I get on

Hi all, I have seen other posts about this fault, but they don't help with my issue. One day the fault came up, but once you switched off and on it went away, eventually it stayed on, rear suspension did not go down. I googled the fault and there was a lot about the pump piston ring worn, so I ...