Anyone replaced rear drive shafts? The J&R have bad reviews.
On carparts4less for £150 each. Any good?

Is the compressor loud? Can you Cleary hear it?
Mine was on the loud side. (Can't hear my new AMK compressor)
Took it apart and the piston seal was worn and wouldn't make enough compression.

Need a new rear off side drive shaft. CV is on its way out.
Seen J&R drive shaft for £90 posted anyone used them before?
Or what do you recommend other than BMW.

Cheers

Hello. I have INPA and bmw DIS etc. I used this a lot on my e36 m3 evo, I've just got a obd2 interface cable from eBay but it will not connect no matter what I try. Anyone able to point me in the right direction or can post a link to the cable I need? https://www.ebay.co.uk/itm/Switched-BMW-INPA-K ...

Sod that for a laugh. If this happens to me, I'm capping that off and be done with it.

Is coming from driver side but will check it out.

My car has started to make this click noise. Totally random and not all the time. On or off throttle, rolling, cornering can start it, but also stop it if it's clicking in a straight line. Like I said it's random and not constant. I've had the disc off and checked shoes. All looks good and so did ...

Perfectly normal don't worry.

Just 90% of what I read on the web. 90% say run the maximum recommended tyre pressure.
I've done that for a year now on new tyres and have even wear across all 4 tyres.
Is it harsh? Yes it is but, I'm sure all 20" wheels with rubber band run flats are.

I've read a lot about this and everyone says put in maximum pressure.
I run 2.9 bar rear and 2.5 front. I have even tyre wear and it's 5 seater.

Oh I'll check that out.

Cheers

Ok thanks for clearing that up. Don't know to if to buy lowering springs or raise the rear now.

Think it will be too harsh low.

I have INPA but don't know how to do that.

Ah ok. Cheers pal I'll ask them to put some in and have a look.

Cheers looks mine is low on the rear.
I have 20" wheels steel spring on front and rear bags, both heights should be 732mm. I have 742mm front and 705 rear. So wrong springs on front and lowered on rear 

Think I'll make some adjustable links for the rear and Jack it up.