Thank you all

I had two tyres fitted last week and the guy done a full scan and reset and no errors I have done one since no errors so as said wondering if it was stuck in service mode ??

Well after two weeks I had to go out in car 45 minutes away key fob won’t lock car now then when I got home I locked car with key and as I walked away I pressed key fob and so it’s started to work again now I would say car drive has charged the key but I went in doors got spare key and that one is ...

Good morning all
I have a 2009 E70 which I put in service mode for hand brake had to leave car jacked up one side for over a week awaiting parts unlocked car with key fob now both keys won’t lock or unlock car but starts fine no fault codes ,checked all fuses all ok would it be key fobs need ...

I am using the Carly scanner but I am looking into changing this as the injector will need coding anyone got ideas for a good scanner / coder ?

The code I get now is 0042FB
Description:
Injectors bank 2, control
I have done an ohms test injector 1,2,3,4,6, are 183-184 and injector 5 is 120-140 so I take it this could be the problem?

Hi all
Any ideas every time I boot the car now the engine cuts out I have to stop take key out put it back in and it starts first time and it starts first time
Does come up with injectors 3/46 ? But clear it and it’s fine ???

Hi all has anyone changed the rear wheel bearing ?
Is it easy or hard and do you just replace the bearing or stub axel as well thanks

I think that when you spray the cleaner in the dpf though the back pressure sensor tube it’s only cleaning the dpf section and not the top part cat if I am correct this is why I am thinking about taking the temperature sensor out to fully clean from the top I use wurths dpf cleaner and it blow some ...

i get a code 00480A clear the code and do force regen and you can feel the car regen,

thermosats changed 40,000 miles ago
glow plugs and relay about 35,000 miles ago
car has done 140,000 miles

does these mean anything to you guys good or bad tia??

ambient pressure : 984.62 bar
ash in particulate ...

Hi has any one removed the temp senor in the top of the dpf while the dpf is in place easy or hard job with trolley jack?
Also has anyone removed dpf from car using trolley jack easy or hard ?
I sprayed dpf cleaner in though the back pressure sensor which has cleaned the ash out but not the soot in ...

Hi all had my dpf was reading 60% soot and 68g ash I cleaned it out with some type of cleaner which I put into the dpf and the ash is 0.6g ash but the soot levels operate at about 60& then drop to 0 with a regen then go back up at 48% soot at moment is this right or is something not working right ...

Sorry if asked before but has anyone removed a dpf filter on a 2009 e70 35d any photo’s how hard is it , mine is 57 ash and 52 soot so I would like to clean / change mine but first I need to remove it ?
Thanks

Had my oil changed at Bmw and had to ask them to reset the fault code which comes on when you have done 100000 miles £79 not to bad

I cut a small hole to sit the module in the battery tray in the boot ,wired straight onto the battery.