Hi, no programming required if you use a cable adapter set from mironics.com

It’s been a few years since I had the e53 and don’t recall there being a large gap between front of speaker and rear of door panel. If you go ahead with the install and there is a gap, you could experiment with the gap or try sealing with some dense foam to fill any gaps in to see if you can hear any ...

Hi, I replaced the factory door speaker pods with some mdf adapters when I changed the front door speakers. There are plastic adapters available but are very flimsy. The pictured ones were removed from my X5 prior to sale and are now surplus. A decent front pair of speakers sure do make a huge ...

Emailed you back, Regards

Hi,

After selling my E53 awhile ago, I have an after market subwoofer enclosure with a JL Audio 10W0v3 subwoofer, as well as a few other bits I have to get round to advertising.......

Pm me if interested

Thanks

I used a multimeter set to ohms to check my glow plugs. One ohm or less resistance is ideal. My car was quite smokey on start up, so i changed all six glow plugs and the control unit while I had the inlet manifold off. Only two of the glow plugs were found to be faulty. It is alot better, but still ...

Hello All, Well i'm glad for those that got there knocking sorted on the front end, but I have'nt :wall: I've changed in pairs the front lower control arms, the anti rollbar drop links and the bottom ball joints. The ball joints were a right bugger to do, resulting in the use of WD40 soak and an air ...