[quote="Smeeagain"]
[quote="Pete"]
Only £25 now. They were three times that when I needed one☺
[/quote]

where from please?

Smee
[/quote]

I got mine from Andrew pages 20 quid +vat

[quote="Smeeagain"] Anyone had this issue? Car has been running lumpy on startup and it came up on the scanner. No individual glowplug errors - 3 of them were replaced about a month ago. The guy at ECP said they had the control units sitting on the shelf (£84) as it was a common problem ......? See ...

My gearbox has been serviced and updated and no different still the same after 2 yrs or more , never seems to lurch when the wife drives it .

Contact pfjones and they will supply you with oem electric kit plug and play easy to fit .

[quote="chrisn7"] My caravan also has LED sidelights. I found my lights had been wired incorrectly, so I started again, and changed to the proper BMW set up. Buy a trailer module off ebay - there are loads about. There is a slot for this by other modules near the battery, and the car already has a ...

[quote="Steamyrotter"] [quote="TimX5"] [quote="Steamyrotter"] You are probably seeing the cold bulb check triggering them.. It sends a low current pulse to check bulbs are ok. Filament bulbs will not light, but there is sufficient current for LEDs. [/quote] What will resolve the problem any idea's ...

[quote="Steamyrotter"]
You are probably seeing the cold bulb check triggering them..

It sends a low current pulse to check bulbs are ok.
Filament bulbs will not light, but there is sufficient current for LEDs.
[/quote]

What will resolve the problem any idea's.

[quote="allforus"] Not sure which van you have but there is a wire that is not used in the 13 pin affair but causes big trouble with brake lights I think it's the one of the earths on pin 11 or 13try disconnecting one or the other and re check [/quote] I've got a sterling Eccles 580 2016 model

Can anyone help I've got a x5 e53 , I've bought a new caravan and it has led lights the problem is that I had fast flashing indicators and the brake lights flash up very dull , I fitted a Sargent vlm4 B3 light control unit to the caravan which was supplied by the caravan dealer and the indicators ...

[quote="Baker3570"] Haven't had time to have the battery tested yet due to work but it has been cranking fine and starting up till this morning where it was a little colder than the other days.. Took abit of cranking (lazy) then fired up but with a big puff of white smoke took the little lad to ...

[quote="X5MO"] As the title reads.. As soon as I put it into drive or reverse it causes a loud clunk from the rear end. I haven't driven it more than a few yards back and forth. Any ideas ??? I have had diff oil changed and most other things done to the car apart from anything with the transfer box ...

I've changed fuel, air , cabin filter and crankcase breather as the bmw dealer seemed to miss all that out on the last service before I bought the car and the only thing they did change was the oil and filter .
Cheer Tim

What's the square warning symbol mean please , is it to do with the service lights.

Tim

[quote="Steamyrotter"] XDSS. I am assuming you have checked voltages on all connections?? Confirm you have 12v at the power leads Then see what you are getting from the control core You should see something on there, even if it is a pulsed signal. That would discount wiring. If i remember i'll have ...

The water will drain out of each end .

Tim